X9015 Potentiometer Datasheet

X9015 Datasheet, PDF, Equivalent


Part Number

X9015

Description

Single Digitally Controlled Potentiometer

Manufacture

Intersil

Total Page 11 Pages
Datasheet
Download X9015 Datasheet


X9015
®
Data Sheet
X9015
Low Noise, Low Power, Volatile
August 31, 2006
FN8157.5
Single Digitally Controlled (XDCP™)
Potentiometer
The Intersil X9015 is a 32 tap potentiometer that is volatile.
The device consists of a string of 31 resistors that can be
programmed to connect the RW/VW wiper output with any of
the nodes between the connecting resistors. The connection
point of the wiper is determined by information
communicated to the device on the 3-wire port. The 3-wire
port changes the tap position by a falling edge on the
increment pin. The direction the wiper moves is determined by
the state of the up/down pin. The wiper position at power up is
Tap #15.
The X9015 can be used in a wide variety of applications that
require a digitally controlled variable resistor to set analog
values.
Features
• 32 taps
• Three-wire up/down serial interface
• VCC = 2.7V–5V
• Operating ICC = 50µA max.
• Standby current = 1µA max.
• RTOTAL = 10kΩ, 50kΩ
• Packages 8 Ld SOIC, 8 Ld MSOP
• Pb-free plus anneal available (RoHS compliant)
Pinout
SOIC/MSOP
INC
U/D
RH/VH
VSS
1
2
X9015
3
4
8
7
6
5
VCC
CS
RL/VL
RW/VW
Block Diagram
www.DataSheet4U.com
VCC (Supply Voltage)
Up/Down
(U/D)
Increment
(INC)
Device Select
(CS)
Control
VSS (Ground)
General
U/D
INC
CS
RH/VH
RW/VW
RL/VL
VCC
VSS
5-Bit
Up/Down
Counter
Control
Circuitry
31
30
29
One 28
of
Thirty
Two
Decoder
2
1
0
Transfer
Gates
Resistor
Array
Detailed
RH/VH
RL/VL
RW/VW
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
XDCP is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005, 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.

X9015
X9015
Ordering Information
PART NUMBER
X9015WS8T1
PART MARKING
X9015W
VCC LIMITS (V)
5 ±10%
RTOTAL (kΩ)
10
TEMPERATURE
RANGE (°C)
PACKAGE
0 to +70
8 Ld SOIC
Tape and Reel
PKG.
DWG. #
M8.15
X9015WS8ZT1 (Note) X9015W Z
X9015UM8
X9015UM8Z (Note)
X9015UM8I*
X9015UM8IZ* (Note)
ABB
DCF
ABD
DCD
0 to +70
8 Ld SOIC (Pb-free)
Tape and Reel
M8.15
50
0 to +70
8 Ld MSOP
M8.118
0 to +70
8 Ld MSOP (Pb-free) M8.118
-40 to +85 8 Ld MSOP
M8.118
-40 to +85 8 Ld MSOP (Pb-free) M8.118
X9015US8*
X9015U
X9015US8Z* (Note)
X9015U Z
X9015US8I*
X9015U I
X9015US8IZ* (Note)
X9015U Z I
X9015WS8-2.7*
X9015W F
X9015WS8Z-2.7* (Note) X9015W ZF
X9015UM8-2.7*
ABC
X9015UM8Z-2.7* (Note) DCF
X9015UM8I-2.7*
ABE
X9015UM8IZ-2.7* (Note) DCE
X9015US8-2.7*
X9015U F
2.7-5.5
0 to +70
8 Ld SOIC
M8.15
0 to +70
8 Ld SOIC (Pb-free) M8.15
-40 to +85 8 Ld SOIC
M8.15
-40 to +85 8 Ld SOIC (Pb-free) M8.15
10
0 to +70
8 Ld SOIC
M8.15
0 to +70
8 Ld SOIC (Pb-free) M8.15
50
0 to +70
8 Ld MSOP
M8.118
0 to +70
8 Ld MSOP (Pb-free) M8.118
-40 to +85 8 Ld MSOP
M8.118
-40 to +85 8 Ld MSOP (Pb-free) M8.118
0 to +70
8 Ld SOIC
M8.15
X9015US8Z-2.7* (Note) X9015U ZF
0 to +70
8 Ld SOIC (Pb-free) M8.15
X9015US8I-2.7*
X9015U G
-40 to +85 8 Ld SOIC
M8.15
X9015US8IZ-2.7* (Note) X9015U ZG
-40 to +85 8 Ld SOIC (Pb-free) M8.15
* Add “T1” suffix for tape and reel.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2 FN8157.5
August 31, 2006


Features ® Data Sheet X9015 Low Noise, Low Powe r, Volatile August 31, 2006 FN8157.5 Single Digitally Controlled (XDCP™) Potentiometer The Intersil X9015 is a 3 2 tap potentiometer that is volatile. T he device consists of a string of 31 re sistors that can be programmed to conne ct the RW/VW wiper output with any of t he nodes between the connecting resisto rs. The connection point of the wiper i s determined by information communicate d to the device on the 3-wire port. The 3-wire port changes the tap position b y a falling edge on the increment pin. The direction the wiper moves is determ ined by the state of the up/down pin. T he wiper position at power up is Tap #1 5. The X9015 can be used in a wide vari ety of applications that require a digi tally controlled variable resistor to s et analog values. Features • 32 taps • Three-wire up/down serial interfac e • VCC = 2.7V–5V • Operating ICC = 50µA max. • Standby current = 1µ A max. • RTOTAL = 10kΩ, 50kΩ • Packages 8 Ld SOIC, 8 Ld MSOP • Pb-free plus anne.
Keywords X9015, datasheet, pdf, Intersil, Single, Digitally, Controlled, Potentiometer, 9015, 015, 15, X901, X90, X9, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)