TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
• High-level output current: IOH/IOL = ±8 mA (min)
at VCC = 3.0 V
• High-speed operation: tpd = 2.3 ns (typ.)
at VCC = 3.3 V,15pF
• Operating voltage range: VCC = 0.9~3.6 V
• 5.5-V tolerant input.
• 3.6-V power down protection output.
Weight: 0.006 g (typ.)
Pin Assignment (top view)
IN A 2
4 OUT Y
Absolute Maximum Ratings (Ta = 25°C)
Power supply voltage
DC input voltage
DC output voltage
Input diode current
Output diode current
DC output current
DC VCC/ground current
−0.5~ 4.6 (Note 1)
−0.5~ VCC + 0.5 (Note 2)
−20 (Note 3)
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
VCC = 0V
High or Low State. IOUT abusolute maximum rating must be observed.
VOUT < GND