2A Logic Controlled High-Side Power Switch
Data Sheet
FEATURES
Low RDSON of 40 mΩ Wide input voltage range: 2.3 V to 13.2 V 2 A continuous operating current, TJ = ...
Description
Data Sheet
FEATURES
Low RDSON of 40 mΩ Wide input voltage range: 2.3 V to 13.2 V 2 A continuous operating current, TJ = <85°C 1.2 V logic compatible enable input Low 15 µA quiescent current, VIN = 3.3 V Low 19 µA quiescent current, VIN = 6.5 V Ultralow shutdown current: 2.0 µA at VIN = 6.5 V Ultrasmall 1.0 mm × 1.5 mm, 6-ball, 0.5 mm pitch WLCSP
APPLICATIONS
Mobile phones Digital cameras and audio devices Portable and battery-powered equipment
GENERAL DESCRIPTION
The ADP1290 is a high-side load switch designed for operation between 2.3 V and 13.2 V. This load switch provides power domain isolation, helping to extend battery operation. The device contains a low on-resistance, N-channel MOSFET that supports more than 2 A of continuous current and minimizes power loss. In addition, RDSON is constant independent of the VIN voltage. The low 15 µA quiescent current and ultralow shutdown current of 20 µA make the ADP1290 ideal for battery-operated portable equipment. The built-in level shifter for enable logic makes the ADP1290 compatible with many processors and general-purpose input/output (GPIO) controllers.
12 V, 2 A Logic Controlled High-Side Power Switch ADP1290
TYPICAL APPLICATIONS CIRCUIT
VIN + –
VOUT
GND
ON EN OFF
CHARGE PUMP
LOAD
12529-001
ADP1290 Figure 1.
In addition to operating performance, the ADP1290 occupies minimal printed circuit board (PCB) space with an area of less than 1.5 mm2 and a height of 0.60 mm.
The ADP1290 is available in an ultrasmall, 1 mm ×...
Similar Datasheet