DatasheetsPDF.com

ADP2230 Dataheets PDF



Part Number ADP2230
Manufacturers Analog Devices
Logo Analog Devices
Description Low Quiescent Current Buck Regulator
Datasheet ADP2230 DatasheetADP2230 Datasheet (PDF)

Data Sheet Dual 2 MHz, 800 mA, Synchronous, Low Quiescent Current Buck Regulator ADP2230 FEATURES Input voltage range: 2.3 V to 6.5 V Fixed and adjustable output voltage options Fixed output voltage pair options: 1.2 V/1.8 V, 1.2 V/3.3 V, 1.8 V/3.3 V Adjustable output voltage range: 0.8 V to 6 V Minimum guaranteed continuous output current: 800 mA Up to 94% efficiency Low quiescent current of 15 µA for both channels in power saving mode (PSM) Low shutdown current: 0.1 μA (typical) 100% duty cy.

  ADP2230   ADP2230


Document
Data Sheet Dual 2 MHz, 800 mA, Synchronous, Low Quiescent Current Buck Regulator ADP2230 FEATURES Input voltage range: 2.3 V to 6.5 V Fixed and adjustable output voltage options Fixed output voltage pair options: 1.2 V/1.8 V, 1.2 V/3.3 V, 1.8 V/3.3 V Adjustable output voltage range: 0.8 V to 6 V Minimum guaranteed continuous output current: 800 mA Up to 94% efficiency Low quiescent current of 15 µA for both channels in power saving mode (PSM) Low shutdown current: 0.1 μA (typical) 100% duty cycle for low dropout operation SYNC pin switching frequency options 2 MHz fixed pulse-width modulation (PWM) mode 2 MHz PSM/PWM automatic transitioning mode External clock synchronization from 1.5 MHz to 2.5 MHz Enable input with precision thresholds for each output 180° phase shifted PWM outputs for minimum VIN ripple Current-limit and thermal shutdown (TSD) protection Quick output discharge (QOD) 10-lead, 3 mm × 3 mm × 0.75 mm LFCSP package APPLICATIONS Portable and battery-powered equipment Automatic meter readers (WSN) Point of sales and transaction processing instruments Mobile phones Digital cameras and audio devices Medical instruments Medium format display tablets and pads GENERAL DESCRIPTION The ADP2230 includes two high efficiency, low quiescent current, 800 mA, step-down, dc-to-dc converters in a small, 10-lead, 3 mm × 3 mm, LFCSP package. The total solution requires only five tiny external components. When the ADP2230 is used with three 0603 capacitors and two 2 mm × 2 mm inductors, the total solution size is about 48 mm2, resulting in the smallest footprint solution to meet a variety of portable applications. The ADP2230 buck regulator uses a proprietary, high speed, current mode, constant frequency, PWM control scheme for excellent stability and transient response. The buck outputs operate out of phase to reduce the input current ripple. To ensure the longest battery life in portable applications, the ADP2230 has a power saving variable frequency mode that reduces the switching frequency under light load conditions. Rev. A Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners. TYPICAL APPLICATION CIRCUIT VIN CIN 10µF ADP2230 2 VIN1 9 VIN2 SW1 1 FB1 3 L1 2.2µH ON OFF 4 EN1 ON 7 EN2 OFF PWM PSM/PWM 6 SYNC AGND 5 L2 2.2µH SW2 10 FB2 8 PGND (EPAD) 11 VOUT1 COUT1 10µF VOUT2 COUT2 10µF 10705-001 Figure 1. Fixed Output Voltage Typical Application Circuit During logic controlled shutdown, the input is disconnected from the output, and it draws less than 0.1 μA from the input source. The ADP2230 operates from input voltages from 2.3 V to 6.5 V, allowing the use of multiple alkaline, NiMH, or lithium cells and other standard power sources. The ADP2230 offers multiple options for setting the operating frequency. To maximize light load efficiency, the ADP2230 can operate at a reduced switching frequency in PSM and switch automatically to PWM as the load increases. The ADP2230 can be forced to operate at 2 MHz in PWM only mode when noise considerations are more important than efficiency. The ADP2230 can also be synchronized with a 1.5 MHz to 2.5 MHz external clock via the SYNC pin. When using the external clock synchronization control, both buck outputs operate in phase with the applied clock signal. The ADP2230 includes an internal power switch, synchronous rectifier, and compensation to minimize external part count and maximize efficiency. Other key protection features include undervoltage lockout to prevent deep battery discharge, internal soft start to prevent input current overshoot at startup, and an integrated, switched resistor, QOD function that automatically discharges the output when the device is disabled. Short-circuit protection and thermal overload protection circuits prevent damage in adverse conditions. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2014 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADP2230 TABLE OF CONTENTS Features .............................................................................................. 1 Applications....................................................................................... 1 General Description ......................................................................... 1 Typical Application Circuit ............................................................. 1 Revision History ............................................................................... 2 Specifications....................................................................


ADP1290 ADP2230 ADP222


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)