DUAL LOW VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
Data Sheet
DUAL LOW VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
General Description
Features
AZV358
The AZV3...
Description
Data Sheet
DUAL LOW VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
General Description
Features
AZV358
The AZV358 is dual low voltage (2.7-5.5V) operational amplifiers which have rail-to-rail output swing capability. The input common-mode voltage range includes ground. The chip exhibits excellent speed-power ratio, achieving 1MHz of bandwidth and 1V/µs of slew rate with low supply current.
The AZV358 is built with BiCMOS process. It has bipolar input and output stages for improved noise performance, low input offset voltage and higher output current drive.
AZV358 is available in the package of TSSOP-8 and MSOP-8. The small packages save space on pc boards, and enable the design of small portable electronic devices. It also allows the designer to place the device closer to the signal source to reduce noise pickup and increase signal integrity.
AZV358 is also available in standard SOIC-8 package.
(For VCC=5V and VEE=0V, typical unless otherwise noted) · Guaranteed 2.7V to 5.5V Performance · No Crossover Distortion · Gain-Bandwidth Product 1MHz · Industrial Temperature Range: -40oC to +85oC · Low Supply Current: 210µA · Rail-to-Rail Output Swing under 10kΩ Load:
VOH up to VCC -10mV VOL near to VEE +65mV · VCM: -0.1V to VCC-0.8V
Applications
· Active Filters · Low Power, Low Voltage Applications · General Purpose Portable Devices · Cellular Phone, Cordless Phone · Battery-Powered Systems
SOIC-8
TSSOP-8
MSOP-8
Figure 1. Package Types of AZV358
Mar. 2010 Rev. 1. 3
B...
Similar Datasheet