HMC1162

Data Sheet 9.25 GHz to 10.10 GHz MMIC VCO with Half Frequency Output HMC1162 FEATURES Dual output fOUT = 9.25 GHz to 10.10 GHz fOUT/2 = 4.625 GHz to 5.050 GHz Power output (POUT): 11 dBm (typical) Single-sideband (SSB) phase noise: −115 dBc/Hz at 100 kHz No external resonator needed RoHS-compliant, 5 mm × 5 mm LFCSP: 25 mm² APPLICATIONS Point to point and multipoint radios Test equipment and industrial controls Very small aperture terminals (VSATs) GENERAL DESCRIPTION The HMC1162 is a monolithic microwave integrated circuit (MMIC), voltage controlled oscillator (VCO) that integrates the resonator, a negative resistance device, and varactor diodes, and features a half frequency output. Because of the monolithic construction of the oscillator, the output power and phase noise performance are excellent over temperature. FUNCTIONAL BLOCK DIAGRAM NC NC NC VTUNE NC NC NC NC 32 31 30 29 28 27 26 25 NC 1 NC 2 NC 3 NC 4 GND 5 NC 6 NC 7 NC 8 24 NC 23 NC 22 NC 21 VCC 20 NC 19 RFOUT 18 NC 17 NC 9 10 11 12 13 14 15 16 PACKAGE BASE GND NOTES 1. NC = NO CONNECT. THESE PINS ARE NOT INTERNALLY CONNECTED. HOWEVER, THESE PINS CAN BE CONNECTED TO RF/DC GROUND WITHOUT AFFECTING THE PERFORMANCE OF THE DEVICE. Figure 1. NC NC GND RFOUT/2 NC NC NC NC 13066-001 The power output is 11 dBm typical from a 5 V supply voltage. The VCO is housed in a RoHS-compliant, 32-lead LFCSP and requires no external matching components. Rev. A Document Feedback Information furnished by Analog Devices i...