SMA4123
1 Form A 60V / 200mΩ MOSFET Output Solid State Relay
Description
The SMA4123 is a single-pole, single-throw, no...
SMA4123
1 Form A 60V / 200mΩ MOSFET Output Solid State Relay
Description
The SMA4123 is a single-pole, single-throw, normally open multipurpose solid state relay. The circuit is composed of an infra-red LED on the input side optically coupled to a Photo Diode Array which drives back-to-back low on resistance enhancement type DMOS
transistors on the output. The SMA4123 has a low on resistance of 160mΩ (TYP) and a high continuous load current rating of up to 2.2 amps.
The SMA4123 comes standard in a 4 pin SIP package.
Applications
Reed Relay Replacement Mechanical Relay Replacement Medical Equipment Battery Monitoring Multiplexers Test Equipment
Schematic Diagram
- LED 1
+ LED 2
Features
High Load Current (2.2A MAX) Low Input Control Current (1.5mA TYP) Low On Resistance (160mΩ TYP) High Input-to-Output Isolation (5kV option) Long Life / High Reliability RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL: VDE:
File # E90096 File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to absolute Maximum Ratings may cause permanent damage to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C Operating Temperature ………………………-40 to +85°C Continuous Input Current ………………………………..50mA Transient I...