DatasheetsPDF.com

MOSFET Driver. SM4208 Datasheet

DatasheetsPDF.com

MOSFET Driver. SM4208 Datasheet






SM4208 Driver. Datasheet pdf. Equivalent




SM4208 Driver. Datasheet pdf. Equivalent





Part

SM4208

Description

MOSFET Driver



Feature


SM4208 Optically Coupled MOSFET Driver w /Discharge Circuit Description The SM4 208 consists of an input drive LED opti cally coupled to a photodiode array out put designed to drive highly capacitive loads, including the gate of a power M OSFET. The active discharge circuit of the PDA assures quick discharge of MOSF ETs, providing fast turn-off times. Thi s device can be us.
Manufacture

Solid State Optronic

Datasheet
Download SM4208 Datasheet


Solid State Optronic SM4208

SM4208; ed in a wide variety of applications for which high levels of input are require d for a MOSFET output. The SM4208 comes standard in a miniature 4 pin SOP pack age. Applications Isolated means to dr ive discrete power MOSFETs Lighting Co ntrols Process Control Modules Solid State Relays Solenoid Controls Schemat ic Diagram Features Miniature 4 pin S OP package Built .


Solid State Optronic SM4208

in active discharge circuit for fast tur n-off Fast Turn-On 11V Gate Drive Vol tage High Input-to-Output Isolation (1 .5kVRMS) Long Life / High Reliability RoHS / Pb-Free / REACH Compliant Agen cy Approvals UL / C-UL: VDE: File # E 201932 File # 40035191 (EN 60747-5-2) Absolute Maximum Ratings The values ind icated are absolute stress ratings. Fun ctional operation .


Solid State Optronic SM4208

of the device is not implied at these or any conditions in excess of those defi ned in electrical characteristics secti on of this document. Exposure to absolu te Maximum Ratings may cause permanent damage to the device and may adversely affect reliability. Storage Temperature ..-55 to +125°C Operating Temperature ......-40 to +85°C Continuous Input C urrent ..50mA Transi.

Part

SM4208

Description

MOSFET Driver



Feature


SM4208 Optically Coupled MOSFET Driver w /Discharge Circuit Description The SM4 208 consists of an input drive LED opti cally coupled to a photodiode array out put designed to drive highly capacitive loads, including the gate of a power M OSFET. The active discharge circuit of the PDA assures quick discharge of MOSF ETs, providing fast turn-off times. Thi s device can be us.
Manufacture

Solid State Optronic

Datasheet
Download SM4208 Datasheet




 SM4208
SM4208
Optically Coupled
MOSFET Driver
w/Discharge Circuit
Description
The SM4208 consists of an input drive LED optically
coupled to a photodiode array output designed to drive
highly capacitive loads, including the gate of a power
MOSFET. The active discharge circuit of the PDA assures
quick discharge of MOSFETs, providing fast turn-off times.
This device can be used in a wide variety of applications for
which high levels of input are required for a MOSFET
output.
The SM4208 comes standard in a miniature 4 pin SOP
package.
Applications
Isolated means to drive discrete power MOSFETs
Lighting Controls
Process Control Modules
Solid State Relays
Solenoid Controls
Schematic Diagram
Features
Miniature 4 pin SOP package
Built in active discharge circuit for fast turn-off
Fast Turn-On
11V Gate Drive Voltage
High Input-to-Output Isolation (1.5kVRMS)
Long Life / High Reliability
RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL / C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …….…..……...………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………70mW
Total Power Dissipation ……………………………..170mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
SM4208
Ordering Information
Part Number
Description
SM4208
SM4208-TR
4 pin SOP, (100/Tube)
4 pin SOP, Tape and Reel (2000/Reel)
© 2013 Solid State Optronics San José, CA
www.ssousa.com +1.408.293.4600
NOTES: Suffixes listed above are not included in marking on
device for part number identification
Page 1 of 7
SM4208 /TR
Rev 2.00 (11/12/2013)
001708




 SM4208
Electrical Characteristics, TA = 25°C (unless otherwise specified)
SM4208
Optically Coupled
MOSFET Driver
w/Discharge Circuit
Parameter
Input Specifications
LED Forward Voltage
LED Reverse Voltage
Reverse Leakage Current
Turn-On Current
Turn-Off Current
Output Specifications
Open Circuit Voltage
Short Circuit Voltage
Isolation Specifications
Isolation Voltage
Input-Output Resistance
Symbol Min. Typ. Max. Units Test Conditions
VF
BVR
IInRleak
IF
IF(OFF)
- 2.8 3.5 V IF = 10mA
5 - - V IR = 10μA
- - 10 A VR = 5V
- 5 10 mA VOUT = 5V
- 0.5 - mA VOUT = 2V
VOC 11 12 - V IF = 10mA
ISC 15 20 - A IF = 10mA
VISO
RI-O
1500
-
- VRMS RH 50%, t=1min
- 1012 -
 VI-O = 500VDC
© 2013 Solid State Optronics San José, CA
www.ssousa.com +1.408.293.4600
Page 2 of 7
SM4208 /TR
Rev 2.00 (11/12/2013)
001708




 SM4208
SM4208 Solder Reflow Temperature Profile Recommendations
SM4208
Optically Coupled
MOSFET Driver
w/Discharge Circuit
(1) Infrared Reflow:
Refer to the following figure as an example of an optimal temperature profile for single occurrence infrared reflow.
Soldering process should not exceed temperature or time limits expressed herein. Surface temperature of device
package should not exceed 250ºC:
G
F
D
E
H
B
A
C
Process
Step
A
B
C
D
E
F
G
H
Description
Preheat Start Temperature (ºC)
Preheat Finish Temperature (ºC)
Preheat Time (s)
Melting Temperature (ºC)
Time above Melting Temperature (s)
Peak Temperature, at Terminal (ºC)
Dwell Time at Peak Temperature (s)
Cool-down (ºC/s)
(2) Wave Solder:
Maximum Temperature:
Maximum Time:
Pre-heating:
Single Occurrence
260ºC (at terminal)
10s
100 - 150ºC (30 - 90s)
Parameter
150ºC
180ºC
90 - 120s
230ºC
30s
260ºC
10s
<6ºC/s
(3) Hand Solder:
Maximum Temperature:
Maximum Time:
Single Occurrence
350ºC (at tip of soldering iron)
3s
© 2013 Solid State Optronics San José, CA
www.ssousa.com +1.408.293.4600
Page 3 of 7
SM4208 /TR
Rev 2.00 (11/12/2013)
001708



Recommended third-party SM4208 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)