UNISONIC TECHNOLOGIES CO., LTD
UC33063A
LINEAR INTEGRATED CIRCUIT
DC TO DC CONVERTER CONTROLLER
DESCRIPTION
The UT...
UNISONIC TECHNOLOGIES CO., LTD
UC33063A
LINEAR INTEGRATED CIRCUIT
DC TO DC CONVERTER CONTROLLER
DESCRIPTION
The UTC UC33063A is a monolithic
regulator subsystem, intended for use as DC to DC converter. This device contains a temperature compensated band gap reference, a duty-cycle control oscillator, driver and high current output switch. It can be used for step down, step-up or inverting switching
regulators as well as for series pass
regulators.
FEATURES
* Operation from 3.0V to 40V. * Short Circuit Current Limiting. * Low Standby Current. * Output Switch Current of 1.5A without External
Transistors. * Frequency of Operation from 100Hz to 100kHz. * Step-up, Step-down or Inverting Switch
Regulators.
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
UC33063AL-D08-T
UC33063AG-D08-T
- UC33063AG-S08-R
Package
DIP-8 SOP-8
Packing
Tube Tape Reel
MARKING
DIP-8
SOP-8
www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 9
QW-R103-044.C
UC33063A
PIN CONFIGURATION
LINEAR INTEGRATED CIRCUIT
PIN DESCRIPTION
PIN NO 1 2 3 4
5
6
PIN NAME Switch Collector Switch Emitter Timing Capacitor
GND Comparator Inverting
Input VCC
7 IPEAK Sense
8 Driver Collector
I/O DESCRIPTION I Internal Darlington pairs TI collector O Internal Darlington pairs TI emitter The value of selected capacitor controls the internal oscillator run rate
I
Inverting input of comparator which can set & initiate the Darlington pairs output switch
I
Current s...