NG QUAD Universal Frequency Translator
FemtoClock® NG QUAD Universal Frequency Translator
8T49N488
DATA SHEET
General Description
The 8T49N488 is a quad PLL ...
Description
FemtoClock® NG QUAD Universal Frequency Translator
8T49N488
DATA SHEET
General Description
The 8T49N488 is a quad PLL with FemtoClock® NG technology, it integrates low phase noise Frequency Translator / Synthesizer, Jitter attenuation, and with alarm and monitoring functions suitable for networking and communications applications. The device has four fully independent PLLs, each PLL is able to generate any output frequency in the 0.98MHz - 312.5MHz range and most output frequencies in the 312.5MHz - 1,300MHz range (see Table 3 for details). A wide range of input reference clocks and operation reference clock may be used as the source for the output frequency.
Each PLL of 8T49N488 has three operating modes to support a very broad spectrum of applications:
1) Frequency Synthesizer
Synthesizes output frequencies from an external reference
clock REFCLK.
Fractional feedback division is used, so there are no
requirements for any specific input reference clock frequency to produce the desired output frequency with a high degree of accuracy.
2) High-Bandwidth Frequency Translator
Applications: PCI Express, Computing, General Purpose
Translates any input clock in the 16MHz - 710MHz frequency
range into any supported output frequency.
This mode has a high PLL loop bandwidth in order to track input
reference changes, such as Spread-Spectrum Clock modulation.
3) Low-Bandwidth Frequency Translator
Applications: Networking & Communications.
Translates any input clock in the...
Similar Datasheet