Capacitive sensor BCT10-S30-UP6X2T-H1151
■ Threaded barrel, M30 x 1.5 ■ Plastic, PA12-GF30 ■ Teach-in and configuration via button
and pin 5
Wiring Diagram
Type code Ident no.
Rated switching distance (flush) Rated switching distance (non-flush) Assured switching distance Hysteresis Temperature drift Repeatability Ambient temperature
Operating voltage Residual ripple DC rated operational current No-load current I0 Residual current Switching frequency Rated insulation voltage Short-circuit protection Voltage drop at Ie Wire breakage / Reverse polarity protection
Construction Dimensions Housing material Active area material Admissible pressure on front cap Max. tightening torque housing nut Connection Vibration resistance Shock resistance Protection class MTTF
Switching state
BCT10-S30-UP6X2T-H1151 2101500
10 mm 15 mm ð (0.72 x Sn) mm 2…20 % type 20 % ð 2 % of full scale -25…+70 °C
10… 30VDC ð 10 % Uss ð 200 mA ð 15 mA ð 0.1 mA 0.01 kHz ð 0.5 kV yes/ cyclic ð 2.4 V yes/ complete
threaded barrel, M30 x 1.5 87.3 mm plastic, PA12-GF30, PEI Plastic, PA, yellow ð 3 bar 5 Nm flange connector, M12 x 1 55 Hz (1 mm) 30 g (11 ms) IP67 1080 years acc. to SN 29500 (Ed. 99) 40 °C
LED yellow
Functional principle
Capacitive proximity switches are designed for non-contact and wear-free detection of electrically conductive as well as non-conductive metal objects.
Edition • 2016-02-12T12:22:27+01:00
1 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ
[email protected] ñ www.turck.com
Capacitive sensor BCT10-S30-UP6X2T-H1151
Mounting instructions / Description Distance D Distance W Distance S Distance G
Diameter of the active area B
minimum distances 60 mm 30 mm 45 mm 60 mm
Ø 30 mm
The given minimum distances have been checked against the standard switching distance. Should the sensitivity of the sensors be changed via potentiometer, the data sheet specifications no longer apply.
Edition • 2016-02-12T12:22:27+01:00
2 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ
[email protected] ñ www.turck.com
Capacitive sensor BCT10-S30-UP6X2T-H1151
Accessories
Type code MAP-M30
Ident no. 6950013
Description
Mounting adapter; material: Polypropylene; sensor replacement with filled container possible (adapter remains in container during sensor replacement)
Design
BST-30B
6947216
Fixing clamp for threaded barrel devices, with dead-stop; material: PA6
Edition • 2016-02-12T12:22:27+01:00
3 / 3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ
[email protected] ñ www.turck.com
.