1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6358 – 1N6372 or MPT-10 – MPT-45C
Available
1500 Watt Low Clamping Factor Transient Voltage Suppressor
DESCRIPTION
...
Description
1N6358 – 1N6372 or MPT-10 – MPT-45C
Available
1500 Watt Low Clamping Factor Transient Voltage Suppressor
DESCRIPTION
This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N6372 are JEDEC registered selections for both unidirectional and bidirectional devices. The 1N6358 through 1N6364 are unidirectional and the 1N6366 through 1N6372 are bidirectional where they all provide a very low specified clamping factor for minimal clamping voltages (VC) above their respective breakdown voltages (VBR) as specified herein. They are most often used in protecting sensitive components from inductive switching transients or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5. They are also very successful in protecting airborne avionics and electrical systems. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
Screening in reference to MIL-PRF-19500
available
Unidirectional and bidirectional TVS series in axial package for thru-hole mounting. Suppresses transients up to 1500 watts @ 10/1000 µs (see figure 1). tclamping (0 volts to V(BR) min):
Unidirectional – Less than 100 picoseconds. Bidirectional – Less than 5 nanoseconds. Working voltage (VWM) range 10 V to 45 V. Low clamping factor (ratio of actual VC/VBR): 1.33 @ full rated power and 1.20 @ 50% rated power. He...
Similar Datasheet