2-Mbit serial I2C bus EEPROM
SO8N (MN) 150 mil width
WLSCP
Unsawn wafer
Product status link M24M02-DR M24M02-R
M24M02-DR M24M02-R
Datasheet
2-Mbit s...
Description
SO8N (MN) 150 mil width
WLSCP
Unsawn wafer
Product status link M24M02-DR M24M02-R
M24M02-DR M24M02-R
Datasheet
2-Mbit serial I²C bus EEPROM
Features
Compatible with following I2C bus modes: – 1 MHz – 400 kHz – 100 kHz
Memory array: – 2 Mbit (256 Kbyte) of EEPROM – Page size: 256 byte – Additional write lockable page (M24M02-DR order codes)
Single supply voltage: – 1.8 V to 5.5 V over –40 °C / +85 °C
Write time: – Byte write within 10 ms – Page write within 10 ms
Random and sequential read modes Write protect of the whole memory array Enhanced ESD/latch-Up protection More than 4 million write cycles More than 200-years data retention Packages:
– SO8N ECOPACK2 – WLCSP ECOPACK2 – Unsawn wafer (each die is tested) – RoHS compliant and halogen-free (ECOPACK2)
DS7025 - Rev 11 - October 2022 For further information contact your local STMicroelectronics sales office.
www.st.com
M24M02-DR M24M02-R
Description
1
Description
The M24M02 is a 2-Mbit I2C-compatible EEPROM (electrically erasable programmable memory) organized as 256 K × 8 bits.
The M24M02-DR and M24M02-R can operate with a supply voltage from 1.8 V to 5.5 V, over an ambient temperature range of –40 °C / +85 °C.
The M24M02-DR offers an additional page, named the identification page (256 byte). The identification page can be used to store sensitive application parameters which can be (later) permanently locked in read-only mode.
Figure 1. Logic diagram
VCC
E2
SCL
M24M02-xR
SDA
WC
VSS
MS49601...
Similar Datasheet