HIGH PERFORMANCE CURRENT MODE POWER SWITCH
UNISONIC TECHNOLOGIES CO., LTD
US1702
Preliminary
LINEAR INTEGRATED CIRCUIT
HIGH PERFORMANCE CURRENT MODE POWER SWIT...
Description
UNISONIC TECHNOLOGIES CO., LTD
US1702
Preliminary
LINEAR INTEGRATED CIRCUIT
HIGH PERFORMANCE CURRENT MODE POWER SWITCH
DESCRIPTION
The UTC US1702 is an integrated PWM controller and Power MOSFET specifically designed for current mode operation with minimal external components. The UTC US1702 is designed to provide several special enhancements to satisfy the needs, for example, Power-Saving mode for low standby power (<0.3W), Frequency Hopping , Constant Output Power Limiting , Over Current Protection (OCP), Over Voltage Protection (OVP), Under Voltage Lock Out (UVLO), and Over Temperature Protection (OTP) etc. IC will be shutdown or can auto-restart in certain situations.
FEATURE
* Internal High Voltage Start-up Circuit * Internal 700V Power MOSFET * Lower than 0.3W Standby Power Design * Gate Output Maximum Voltage Clamp(15V) * Over temperature protection * Over voltage protection * Leading edge blanking * Cycle-by-Cycle current limiting * Under Voltage Lock Out
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
US1702L-D08-T
US1702G-D08-T
Package DIP-8
DIP-8
Packing Tube
MARKING
www.unisonic.com.tw Copyright © 2013 Unisonic Technologies Co., Ltd
1 of 5
QW-R911-020.c
US1702
Preliminary
PIN CONFIGURATION
GND 1 GND 2
FB 3 VCC 4
PIN DESCRIPTION
PIN NO. 1、2
3 4 5~8
PIN NAME GND FB VCC Drain
Ground Feedback Supply voltage Power MOSFET drain
BLOCK DIAGRAM
LINEAR INTEGRATED CIRCUIT
8 Drain 7 Drain 6 Drain 5 Drain
DESCRIPTION
Note...
Similar Datasheet