Switch-mode Power Rectifier
MURF1660CTG
Switch-mode Power Rectifier
These state−of−the−art devices are designed for use in switching power supplies...
Description
MURF1660CTG
Switch-mode Power Rectifier
These state−of−the−art devices are designed for use in switching power supplies, inverters and as free wheeling diodes.
Features
Ultrafast 60 Nanosecond Recovery Times 150°C Operating Junction Temperature Epoxy Meets UL 94 V−0 @ 0.125 in High Temperature Glass Passivated Junction Low Leakage Specified @ 150°C Case Temperature Current Derating @ Both Case and Ambient Temperatures Electrically Isolated. No Isolation Hardware Required. This is a Pb−Free Package*
Mechanical Characteristics:
Case: Epoxy, Molded Weight: 1.9 Grams (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
MAXIMUM RATINGS (Per Leg)
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current Total Device, (Rated VR), TC = 150°C
Per Diode Per Device
Symbol VRRM VRWM
VR IF(AV)
Value 600
8 16
Unit V
A
Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz), TC = 150°C Non−repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz)
IFM 16 A IFSM 100 A
Operating Junction and Storage Temperature RMS Isolation Voltage (t = 0.3 second, R.H. ≤ 30%, TA = 25°C) (Note 1) Per Figure 3
TJ, Tstg − 65 to +150 Viso1
4500
°C V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of th...
Similar Datasheet