Adjustable 1 Channel Current Limited Power Switch
SEMICONDUCTOR
TECHNICAL DATA
Adjustable 1 Channel Current Limited Power Switch
Description The KIC6961T is integrated po...
Description
SEMICONDUCTOR
TECHNICAL DATA
Adjustable 1 Channel Current Limited Power Switch
Description The KIC6961T is integrated power switches optimized for USB and other
hot-swap applications with a programmable current limit feature. Current limit accuracy 6 % can be achieved at high current-limit settings.
The family of devices complies with USB 2.0 and is available with high polarity of Enable input. They offer current and thermal limiting and short circuit protection as well as controlled rise time and under-voltage lockout functionality.
KIC6961T
Analog CMOS Integrated Circuits
Features Single USB Port Power Switches with discharge Operating input voltage range 2.7V to 5.5V Up to 2.1A Maximum Load Current Adjustable Current Limit : 75mA to 2.5A Reverse Current Blocking Fault report with blanking time(7ms) 100m Power MOSFET
Maximum Ratings (Ta=25 )
Characteristic
Symbol
Rating
Input Voltage
Output Voltage
Power Dissipation (No Heatsink)
VIN VOUT
PD *
6.5 6.5
900
Operating Junction Temperature
Storage Temperature
Tj -40 ~ 125 Tstg -55 ~ 150
* Note ) Package Mounted on a Ceramic Board (600mm2 0.8mm)
Unit V V
mW
Pin Configurations TS6(SOT23-6)
2013. 4. 29
Revision No : 0
1/11
Block Diagram
KIC6961T
Pin Descriptions Pin Number 1 2 3 4
5
6
Pin Name VIN GND VEN FLG
ILMIT
VOUT
Descriptions Voltage input pin Ground Enable input (Active high) Over-current and over-temperature fault report pin (Open drain) Current limit set pin
External resistor used to set current lim...
Similar Datasheet