Document
AZ DISPLAYS
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY
CUSTOMER APPROVAL
※ PART NO. : ATM0700L6C-CT (AZ DISPLAYS) VER1.0
APPROVAL
COMPANY CHOP
CUSTOMER COMMENTS
AZ DISPLAYS ENGINEERING APPROVAL
DESIGNED BY
CHECKED BY
APPROVED BY
YGB
ATM0700L6C-CT(AZ DISPLAYS) TFT MODULE VER1.0
REVISION RECORD
REVISION REVISION DATE
VER1.0
2012-07-26
PAGE
FIRST ISSUED
CONTENTS
AZ DISPLAYS
1
ATM0700L6C-CT(AZ DISPLAYS) TFT MODULE VER1.0 ※ CONTENTS
1.0 GENERAL SPECIFICATION 2.0 BLOCK DIAGRAM 3.0 PIN ASSIGNMENT 4.0 OPERATING SPECIFICATIONS 5.0 OPTICAL CHARACTERISTICS 6.0 RELIABILITY TEST 7.0 PRECAUTION FOR USING LCM 8.0 MECHANICAL DIAGRAM 9.0 PACKAGE DRAWING 10.0 INSPECTION SPECIFICATION
AZ DISPLAYS
2
ATM0700L6C-CT(AZ DISPLAYS) TFT MODULE VER1.0
1.0 GENERAL SPECIFICATION
Item 1. LCD size 2. Driver element 3. Resolution 4. Display mode 5. Dot pitch (W*H) 6. Pixel pitch(W*H) 7. Active area(W*H) 8. Module size (W*H) 9. Surface treatment 10. Bezel material 11. Color arrangement 12. Color 13. Interface 14. Weight 15. RoHS
Specification 7.0 inch(Diagonal) a-Si TFT active matrix 800x(RGB) x 480 Normally white, Transmissive 0.0642mm(W) x 0.1790mm(H) 0.1926mm(W) x 0.1790mm(H) 154.08mm(W) x 85.92mm(H) 164.9mm(W) x 100.0mm(H) x 12.5mm(D)
Clear Stainless steel RGB-stripe 262K 18bit LVDS interface 206g(Typ.) ROHS compliant
Remark Note 1
Note 1: Please refer to mechanical drawing.
2.0 BLOCK DIAGRAM
7'' TFT with RGB interface
LVDS To RGB Backlight driving LCD Power
converting circuit circuit
circuit
Touch panel
AZ DISPLAYS
LVDS interface
Touch interface
3
ATM0700L6C-CT(AZ DISPLAYS) TFT MODULE VER1.0
3.0 PIN ASSIGNMENT
Connector on LCM : HIROSE DF19G-20P-1H or compatible,mating with HIROSE DF19-20S-1C or compatible
Pin No.
Symbol
Function
1 TX0-
Negative LVDS differential data input(R0-R5,G0)*3
2 TX0+
Positive LVDS differential data input(R0-R5,G0)*3
3 VSS*1
Ground
4 TX1-
Negative LVDS differential data input(G1-G5,B0-B1)*3
5 TX1+
Positive LVDS differential data input(G1-G5,B0-B1)*3
6 VSS*1
Ground
7 TX2-
Negative LVDS differential data input(B2-R5,HS,VS,DE)*3
8 TX2+
Positive LVDS differential data input(B2-R5,HS,VS,DE)*3
9 VSS*1
Ground
10 CLK-
Clock Signal(-)
11 CLK+
Clock signal(+)
12 VSS*1
Ground
13 NC*2
Non Connection(open)
14 NC*2
Non Connection(open)
15 VDD
+3.3V power supply for logic and LCM power
16 VDD
+3.3V power supply for logic and LCM power
17 BL+
+5.0V Backlight driving circuit power supply
18 BL-
Backlight driving circuit ground
19
PWM
Backlight ON/OFF/Dimming control(PWM:100~1000HZ, 0~100%)
20 VSS*1
Ground
Note 1) Please connect VSS pin to ground. Don’t use it as no-connect nor connection with high impedance. Note 2) Please connect NC pin to nothing. Don’t connect it to ground nor to other signal input. Note 3) Refer to next page.
AZ DISPLAYS
4
ATM0700L6C-CT(AZ DISPLAYS) TFT MODULE VER1.0
RECOMMENDED TRANSMITTER(DS90C365) TO LCM INTERFACE ASSIGNMENT
AZ DISPLAYS
5
ATM0700L6C-CT(AZ DISPLAYS) TFT MODULE VER1.0
Touch Panel Section Recommended connector: Hirose FH12-6S-1SH(55) or compatible
AZ DISPLAYS
Front view
Side view
Rear view
33.01
Note: 1.Structure:COVERLENS+FPC+ITO GLASS 2.IC:FT5316 3.VDD:2.8V-3.3V 4.VIO :2.8V-3.3V 5.Interface:IIC,5-point touch 6."*" are critical dimensions 7.RoHs compliant
Pull tape
PIN6
"A"
PIN1
SEE A
SCALE(3:1)
PIN NAME 1 SDA
2 SCL 3 /RST 4 INT
5 VDD 6 GND
6
ATM0700L6C-CT(AZ DISPLAYS) TFT MODULE VER1.0 4.0 Operating Specification
4.1 ABSOLUTE MAXIMUM RATINGS
Item Operating temperature Storage temperature Input voltage Supply voltage for logic
Symbol Top Tst Vin
Vdd- Vss
Min -20 -30
Vss-0.3 -0.3
Typ Max - 70 - 80 - Vdd+0.3 - 3.6
Unit ºC ºC V V
4.1.1 Typical Operation Conditions
Item
Symbol
Power Supply Voltage
VDD
Power Supply current
IDD
BL circuit voltage
VLED(PIN17)
BL circuit current Input voltage (high)
Input voltage (low)
ILED Vih Vil
Condition Ta=25ºC VDD=3.3V Ta=25ºC VLED=5V H level
L level
Min 3.0
4.8
2.0 Vss
Typ Max Unit
3.3 3.6
V
140 -
mA
5.0 5.2
V
987 - Vdd - 0.8
mA V
V
4.1.2 Backlight driving conditions
Item
Backlight Voltage (To LED directly)
LED life time
Symbol VBL --
Condition
Min
IBL=300mA
15
-- 30000
Typ 16.5
--
Max 17.5
--
Unit
Remark
V Note1
H Note2,3
Note 1: The LED Supply Voltage is defined by the number of LED at Ta=25℃ and IBL =300mA. Note 2: The “LED life time” is defined as the module brightness decrease to 50% original brightness at
Ta=25℃ and IBL =300mA.
Note 3: Please make sure the LCM works under well heat dissipated condition, and to prolong the lifetime, please
reduce the driving current when environment temperature increases,.
AZ DISPLAYS
7
ATM0700L6C-CT(AZ DISPLAYS) TFT MODULE VER1.0 4.2 TIMING CHARACTERISTICS
4.2.1 Data Input Format
AZ DISPLAYS
8
ATM0700L6C-CT(AZ DISPLAYS) TFT MODULE VER1.0
4.2.2 AC Electrical Characteristics
AZ DISPLAYS
9
ATM0700L6C-CT(AZ DISPLAYS) TFT MODULE VER1.0
4.2.3 Timing
AZ DISPLAYS
10
ATM0700L.