Single-In-Line Reed Relays
SIL Series
Single-In-Line Reed Relays
MEDER electronic
DESCRIPTION
Single-In-Line Reed Relays reduce the required space...
Description
SIL Series
Single-In-Line Reed Relays
MEDER electronic
DESCRIPTION
Single-In-Line Reed Relays reduce the required space to a minimum. Requiring only half the PCB area of the DIP or DIL series, the SIL relays offer all the advantages of Reed Technology.
CHARACTERISTICS
High resistance coils of up to 2000 Ω at 12 VDC Breakdown voltage coil / contact of up to 4.25 kVDC Contact form 1A, 1B or 1C
FEATURES
Magnetic shield available High resistance version Other coil resistances available Option with coax screen for Z=50 Ohm
Impedance
DIMENSIONS
All dimensions in mm [inch]
20.6 [0.811]
5.9 [0.232]
8.3 [0.327]
198
PIN OUT
View from top of component, 2.54mm [0.10”] pitch grid
71 Form 1A
71 Form 1B
51 Form 1C
1 3+ 5
7
1 3+ 5
7
1 2 3+ 5
7
“+” by option with diode
www.meder.com
MEDER electronic
RELAY DATA
SIL Series
Single-In-Line Reed Relays
All Data at 20° C Contact Ratings Switching Power Switching Voltage
Switch Model → Contact Form →
Switch 31 Form A
Switch 72 Form A
Conditions
Min. Typ. Max. Min. Typ. Max. Units
Any DC combination of V & A not to exceed their individual max.‘s DC or peak AC
50 15 500 200
W V
Switching Current
DC or peak AC
2 1.0
A
Carry Current Static Contact Resistance
DC or peak AC w/ 0.5 V & 10mA
2 1.25
A
80 150 mΩ
Dynamic Contact Resistance
Measured w/ 0.5 V & 50mA , 1.5 ms after closure
200 mΩ
Insulation Resistance across Across Contact
Contacts
Coil - Contact
Breakdown Voltage across Across Con...
Similar Datasheet