DatasheetsPDF.com

CA24S15-40 Dataheets PDF



Part Number CA24S15-40
Manufacturers WALL
Logo WALL
Description DC/DC converter
Datasheet CA24S15-40 DatasheetCA24S15-40 Datasheet (PDF)

CA SERIES 25 TO 40 WATTS 25 TO 40 WATTS - CA SERIES Ultra Wide Input Voltage Range, Low Profile F E AT U R E S • Ultra-Wide Input Voltage Range (4:1) • LC Input Filter for Low Reflected Ripple Current • Regulated Outputs • Thermal Shutdown with Auto-Recovery • Current Limiting Short Circuit Protection • 500VDC min. I/O Isolation • Industry Standard Package and Pin-Out • Industrial temperature grade also available THE CA SERIES FROM WALL INDUSTRIES The CA Series of single, dual and triple outpu.

  CA24S15-40   CA24S15-40


Document
CA SERIES 25 TO 40 WATTS 25 TO 40 WATTS - CA SERIES Ultra Wide Input Voltage Range, Low Profile F E AT U R E S • Ultra-Wide Input Voltage Range (4:1) • LC Input Filter for Low Reflected Ripple Current • Regulated Outputs • Thermal Shutdown with Auto-Recovery • Current Limiting Short Circuit Protection • 500VDC min. I/O Isolation • Industry Standard Package and Pin-Out • Industrial temperature grade also available THE CA SERIES FROM WALL INDUSTRIES The CA Series of single, dual and triple output DC/DC converters performs over an ultra-wide input voltage range (4:1), providing indefinite short circuit and overvoltage protection. Without a heatsink, the CA Series’ design technology allows for up to 40 watts output power from a 3.0 x 3.0 x 0.40” case. These current mode control forward converters are designed for improved transient response and reduced stress on switching components. SPECIFICATIONS: CA SERIES All specifications apply @ +25 C ambient unless otherwise noted. INPUT SPECIFICATIONS Input Voltages......................4.5-9,9-36, 18-75, 55-110VDC Nominal Input...........................................5, 24, 48, 74VDC Input Filter......................................................LC input filter Remote On/Off Control........................Open Collector TTL OUTPUT SPECIFICATIONS Output Current......................................................see table Voltage Tolerance....................±1% primary, ±2% auxiliary Output Trim (external).........................±10% (primary only) Line Regulation...........................................................0.5% Load Regulation..........................±1% singles (see note 5) Ripple/Noise (20MHz BW)..................................75mV p-p Transient Response............<200u sec to within ±1% Vout GENERAL SPECIFICATIONS Efficiency...........................................................80% typical .............5VDC in................................................75% typical Isolation Voltage (input to output)...................500VDC min. Isolation Resistance (input to output)...............500MOhms Switching Frequency...................................250kHz(typical) ENVIRONMENTAL SPECIFICATIONS Operating Temperature (ambient).......-25 to 85%°C (case) Storage Temperature.....................................-55 to +100°C Temperature Coefficient.........................0.02% per °C max. Humidity (non-condensing).......................20% to 95% R.H. PHYSICAL SPECIFICATIONS Shielding...............................................................Six-sided Weight..........................................................approx. 4.0 oz. Case Material.......................................Black coated metal, ...................................................non-conductive base plate Due to advances in technology, specifications subject to change without notice. 1 603 778 2300 W W W.WALLINDUSTRIES.C O M 25 TO 40 WATTS CA SERIES Input Output Voltage Voltage (VDC) (VDC) Output Over Voltage Model Current Set-Point Number (Amps) (VDC) 4.5-9 3.3 7.58 5 5.0 12 2.0 15 1.6 18 1.38 ±5 2.5 ±12 1.04 ±15 .83 9-36 3.3 5 12 15 18 ±12 ±15 +5/±12 +5/±15 7.58 5.0 8.0 2.0 3.3 1.6 2.66 1.38 2.22 1.25 1.66 1.0 1.33 4.0/±0.42 4.0/±0.33 18-75 3.3 5 12 15 18 ±12 ±15 +5/±12 +5/±15 7.58 5.0 8.0 2.0 3.3 1.6 2.66 1.38 2.22 1.25 1.66 1.0 1.33 4.0/±0.42 4.0/±0.33 55-110 3.3 5 12 15 18 ±12 ±15 +5/±12 +5/±15 7.58 5.0 8.0 2.0 3.3 1.6 2.66 1.38 2.22 1.25 1.66 1.0 1.33 4.0/±0.42 4.0/±0.33 5.1 6.2 15 18 21 6.2 15 18 5.1 6.2 6.2 15 15 18 18 21 21 15 15 18 18 6.2/15 6.2/18 5.1 6.2 6.2 15 15 18 18 21 21 15 15 18 18 6.2/15 6.2/18 5.1 6.2 6.2 15 15 18 18 21 21 15 15 18 18 6.2/15 6.2/18 CA5S3.3-25 CA5S5-25 CA5S12-25 CA5S15-25 CA5S18-25 CA5D5-25 CA5D12-25 CA5D15-25 CA24S3.3-25 CA24S5-25 CA24S5-40 CA24S12-25 CA24S12-40 CA24S15-25 CA24S15-40 CA24S18-25 CA24S18-40 CA24D12-30 CA24D12-40 CA24D15-30 CA24D15-40 CA24T12-30 CA24T15-30 CA48S3.3-25 CA48S5-25 CA48S5-40 CA48S12-25 CA48S12-40 CA48S15-25 CA48S15-40 CA48S18-25 CA48S18-40 CA48D12-30 CA48D12-40 CA48D15-30 CA48D15-40 CA48T12-30 CA48T15-30 CA74S3.3-25 CA74S5-25 CA74S5-40 CA74S12-25 CA74S12-40 CA74S15-25 CA74S15-40 CA74S18-25 CA74S18-40 CA74D12-30 CA74D12-40 CA74D15-30 CA74D15-40 CA74T12-30 CA74T15-30 PIN CONNECTIONS Singles Duals Triples Alternate Pin-Out A 1 Remote Remote Remote 2 Case Case Case 3 + Vin +Vin +Vin 4 - Vin -Vin -Vin 5 No pin No pin No pin 6 N/C -Vout Aux. -Vout 7 N/C Common Aux. +Vout 8 Common Common Common 9 +Vout +Vout +5Vout -Vin +Vin No pin 10 Trim Trim Trim NOTES: 1. All case and pin to case dimensions reference only unless otherwise noted. 2. PC pins 0.04” dia x 0.18” long min.; typical nine places. 3. Pin to pin tolerance ±0.01”. Pin dimension tolerance ±0.005” 4. Duals: 25 - 100% load: ±1% and 0-100% load: ±5%. Triples: 10% min load required on primary output, ±1%. 5. Significant capacitive load may inhibit start-up and operation, consult factory. 6. For Indust.


CA24S15-25 CA24S15-40 CA24S18-25


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)