4-megabit 2.3-volt or 2.7-volt Minimum SPI Serial Flash Memory
Features
• Single 2.3V - 3.6V or 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible
– Supports SPI Modes ...
Description
Features
Single 2.3V - 3.6V or 2.7V - 3.6V Supply Serial Peripheral Interface (SPI) Compatible
– Supports SPI Modes 0 and 3 70 MHz Maximum Clock Frequency Flexible, Uniform Erase Architecture
– 4-Kbyte Blocks
– 32-Kbyte Blocks
– 64-Kbyte Blocks
– Full Chip Erase Individual Sector Protection with Global Protect/Unprotect Feature
– One 16-Kbyte Top Sector
– Two 8-Kbyte Sectors
– One 32-Kbyte Sector
– Seven 64-Kbyte Sectors Hardware Controlled Locking of Protected Sectors via WP pin Flexible Programming Options
– Byte/Page Program (1 to 256 Bytes)
– Sequential Program Mode Capability Fast Program and Erase Times
– 1.2 ms Typical Page Program (256 Bytes) Time
– 50 ms Typical 4-Kbyte Block Erase Time
– 250 ms Typical 32-Kbyte Block Erase Time
– 400 ms Typical 64-Kbyte Block Erase Time Automatic Checking and Reporting of Erase/Program Failures JEDEC Standard Manufacturer and Device ID Read Methodology Low Power Dissipation
– 5 mA Active Read Current (Typical)
– 15 µA Deep Power-down Current (Typical) Endurance: 100,000 Program/Erase Cycles Data Retention: 20 Years Complies with Full Industrial Temperature Range Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options
– 8-lead SOIC (150-mil and 208-mil Wide)
– 8-pad Ultra Thin DFN (5 x 6 x 0.6 mm)
4-megabit 2.3-volt or 2.7-volt Minimum SPI Serial Flash Memory
AT25DF041A
1. Description
The AT25DF041A is a serial interface Flash memory device designed for use in a wide variety of high-v...
Similar Datasheet