2.4GHz FRONT END MODULE
RF6525
3.0V TO 4.2V, 2.4GHz FRONT END MODULE
Package Style: QFN, 20-Pin, 3.5mmx3.5mmx0.5mm
TXCT GND
VCC_BAIS VCC NC
Fe...
Description
RF6525
3.0V TO 4.2V, 2.4GHz FRONT END MODULE
Package Style: QFN, 20-Pin, 3.5mmx3.5mmx0.5mm
TXCT GND
VCC_BAIS VCC NC
Features
TX Output Power: 22dBm
RX Gain: 11.5dB
RX NF: 2.5dB
Integrated RF Front End Module with TX/RX balun, PA, Filter, LNA with Bypass Mode and DP2T Switch.
Dual Differential Interface.
Transceiver
Applications
ZigBee® 802.15.4 Based Systems for Remote Monitoring and Control
2.4GHz ISM Band Applications
Smart Meters for Energy Management
15 14 13 12 TXN 16 TXP 17 RXCT 18 RXBN 19 RXBP 20
12 3 4
11
10 VCC 9 GND ANT 8 ANT1 7 GND 6 ANT2
5
LNA_MODE VCC
ANT_SEL TX_EN RX_EN
Functional Block Diagram
Product Description
The RF6525 integrates a complete solution in a single Front End Module (FEM) for ZigBee® applications in the 2.4GHz to 2.5GHz band. This FEM integrates the PA plus harmonic filter in the transmit path and the LNA with bypass mode in the receive side. It also integrates a diversity switch and provides balanced input and output signals for both the TX and RX paths respectively.
The RF6525 FEM is ideal for ZigBee® systems operating with a minimum output power of 20dBm and high efficiency requirements. On the receive path, the RX Chain provides 11.5dB of typical gain with only 7mA of current and excellent NF of 2.5dB. This FEM meets or exceeds the system requirements for ZigBee® applications operating in the 2.4GHz to 2.5GHz band. The device is provided in a 3.5mm x 3.5mm x 0.5mm, 20-pin QFN package.
Ordering Information
RF6...
Similar Datasheet