LAN9730i

LAN9730/LAN9730i High-Speed Inter-Chip (HSIC) USB 2.0 to 10/100 Ethernet Controller Highlights Single Chip HSIC USB 2.0 to 10/100 Ethernet Controller Integrated 10/100 Ethernet MAC with Full-Duplex Support Integrated 10/100 Ethernet PHY with HP AutoMDIX Support Integrated USB 2.0 Hi-Speed Device Controller Integrated HSIC Interface Implements Reduced Power Operating Modes Target Applications Embedded Systems Set-Top Boxes PVRs CE Devices Networked Printers USB Port Replicators Test Instrumentation Industrial Key Features USB Device Controller - Fully compliant with Hi-Speed Universal Serial Bus Specification, revision 2.0 - Supports HS (480 Mbps) mode - Four Endpoints supported - Supports vendor specific commands - Integrated HSIC Interface - Remote wakeup supported High-Performance 10/100 Ethernet Controller - Fully compliant with IEEE 802.3/802.3u - Integrated Ethernet MAC and PHY - 10BASE-T and 100BASE-TX support - Full- and half-duplex support - Full- and half-duplex flow control - Preamble generation and removal - Automatic 32-bit CRC generation and checking - Automatic payload padding and pad removal - Loop-back modes - TCP/UDP/IP/ICMP checksum offload support - Flexible address filtering modes - One 48-bit perfect address - 64 hash-filtered multicast addresses - Pass all multicast - Promiscuous mode - Inverse filtering - Pass all incoming with status report - Wakeup packet support - Integrated Ethernet PHY - Auto-negotiation - Automat...