USB3320
Highly Integrated Full Featured Hi-Speed USB 2.0 ULPI Transceiver
Features
• Integrated ESD protection circuit...
USB3320
Highly Integrated Full Featured Hi-Speed USB 2.0 ULPI Transceiver
Features
Integrated ESD protection circuits
- Up to ±15kV IEC Air Discharge without external devices
Over-Voltage Protection circuit (OVP) protects the VBUS pin from continuous DC voltages up to 30V
Integrated USB Switch
- No degradation of Hi-Speed electrical characteristics
- Allows single USB port of connection by providing switching function for:
–Battery charging –Stereo and mono/mic audio –USB Full-Speed/Low-Speed data flexPWR® Technology
- Low current design ideal for battery powered applications
- “Sleep” mode tri-states all ULPI pins and places the part in a low current state
- 1.8V to 3.3V IO Voltage (±10%)
Integrated battery to 3.3V
regulator
- 2.2uF bypass capacitor
- 100mV dropout voltage
“Wrapper-less” design for optimal timing performance and design ease
- Low Latency Hi-Speed Receiver (43 HiSpeed clocks Max) allows use of legacy UTMI Links with a ULPI bridge
Selectable Reference Clock Frequency
- Frequencies: 12, 13, 19.2, 24, 26, 27, 38.4, 52 or 60MHz - pin selectable
External Reference Clock operation available
- ULPI Input Clock Mode (60MHz sourced by Link)
- 0 to 3.6V input drive tolerant
- Able to accept “noisy” clock sources as reference to internal, low-jitter PLL
Internal Oscillator operation available
This mode requires external Quartz Crystal or Ceramic Resonator
Smart detection circuits allow identification of USB charger, headset, or data cable inserti...