L5963
Automotive dual monolithic switching regulator with LDO and HSD
'!0'03
PowerSSO-36
(exposed pad)
'!0'03...
L5963
Automotive dual monolithic switching
regulator with LDO and HSD
'!0'03
PowerSSO-36
(exposed pad)
'!0'03
PowerSSO-36 (slug-up)
*$3*36
VQFPN-48
Featuress
AEC-Q100 qualified
Two step-down synchronous switching voltage
regulators with internal power switches:
– Wide input voltage range (from 3.5 V to 26 V) – Internal high-side/ low-side NDMOS – 1 V minimum output – 3.0 A load current – 250 kHz free-run frequency – 250 kHz < f < 2 MHz synchronization range – Integrated soft-start – Independent hardware enable pins – Independent power supply – 180° PWM output phase shift – Programmable switching frequency divider
by 1, 2, 4 or 8 between the two DC/DC
regulators – Power good function
One standby / linear
regulator – Output voltage programmable with external resistor divider – 250 mA maximum current capability – Backup function – Power good function
One high side driver – 0.5 V max drop @ 0.5 A – Protected against short to ground and battery, loss of ground and battery, unsupplied short to battery
Programmable under voltage battery detector – Under voltage threshold adjustable through dedicated pin (VDIN)
Load dump protection
Independent thermal protection on all
regulators
Datasheet - production data
Independent current limit on all
regulators Extremely low quiescent current in standby
conditions Power good / adjustable voltage detector
outputs to realize customized power up/down sequences
Description
L5963 is a dual step-down switch...