high efficiency single inductor buck-boost DC-DC converter and high brightness WLED driver
STBB3JCC
2 A, high efficiency single inductor buck-boost DC-DC converter and high brightness WLED driver
Datasheet - pr...
Description
STBB3JCC
2 A, high efficiency single inductor buck-boost DC-DC converter and high brightness WLED driver
Datasheet - production data
Flip Chip 20, pitch = 0.4 mm
Features
100 mV feedback signal Input voltage range from 1.8 V to 5.5 V 2 A output current at 3.3 VOUT in buck mode
(VIN= 3.6 V to 5.5 V) 800 mA output current at 3.3 VOUT in boost
mode (VIN ≥ 2.0 V) Typical efficiency higher than 94% Automatic transition between step-down and
boost mode Adjustable output voltage from 1.2 V to 5.5 V Power save mode (PS) at light load 2.0 MHz fixed switching frequency Adjustable switching frequency up to 2.4 MHz
(by external synchronous square signal) Device quiescent current less than 50 μA Load disconnect during shutdown Shutdown function and soft-start Shutdown current < 1 μA Available in Flip Chip 20, pitch = 0.4 mm
Applications
HB WLED driver
Single cell Li-Ion, two-cell and three-cell alkaline, Ni-MH powered devices
Memory card supply
Tablet, smartphones
Digital cameras
Description
The STBB3JCC is a fixed frequency, high efficiency, buck-boost DC-DC converter which provides output voltages from 1.2 V to 5.5 V starting from input voltage from 1.8 V to 5.5 V. Thanks to very low sensing voltage, only 100 mV and very low RDS(on) of integrated power MOSFET, it achieves very high efficiency driving high brightness white LED in constant current mode. The device can operate with input voltages higher than, equal to, or lower than the output vol...
Similar Datasheet