TO-92
TS79L00 Series
3-Terminal 100mA Negative Voltage Regulator
SOT-89
Pin Definition: 1. Ground 2. Input 3. Output
...
TO-92
TS79L00 Series
3-Terminal 100mA Negative Voltage
Regulator
SOT-89
Pin Definition: 1. Ground 2. Input 3. Output
General Description
The TS79L00 Series of negative voltage
regulators are inexpensive, easy-to-use devices suitable for a multitude of applications that require a regulated supply of up to 100mA. Like their higher power TS7900 and TS79M00 Series cousins, these
regulators feature internal current limiting and thermal shutdown making them remarkably rugged. No external components are required with the TS79L00 devices in many applications. These devices offer a substantial performance advantage over the traditional zener diode-resistor combination, as output impedance and quiescent current are substantially reduced.
Features
● Output Voltage Range -5V, -9V ● Output current up to 100mA ● Internal thermal overload protection ● Internal short-circuit current limiting ● Output
transistor safe-area compensation ● Output voltage offered in 4% tolerance
Standard Application Circuit
Ordering Information
Part No.
Package
Packing
TS79LxxCT B0
TO-92
1Kpcs / Bulk
TS79LxxCT A3
TO-92
2kpcs / Ammo
TS79LxxCY RM
SOT-89
1kpcs / 7” Reel
Note: Refer to detail ordering information table.
A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate voltage.
* = Cin is required if reg...