Hot Swappable 2-Wire Bus Buffer
U U
FEATURES
■ Automatic Disconnect of SDA/SCL Lines when Bus is Stuck Low for ≥ 30ms
■ Recovers Stuck Busses with Auto...
Description
U U
FEATURES
■ Automatic Disconnect of SDA/SCL Lines when Bus is Stuck Low for ≥ 30ms
■ Recovers Stuck Busses with Automatic Clocking* ■ Bidirectional Buffer* for SDA and SCL Lines
Increases Fanout ■ Prevents SDA and SCL Corruption During Live
Board Insertion and Removal from Backplane ■ Pin Compatible with LTC4300A-1 ■ ±15kV Human Body Model ESD Protection ■ Isolates Input SDA and SCL Lines from Output ■ Compatible with I2CTM, I2C Fast-Mode and SMBus
Standards (Up to 400kHz Operation) ■ READY Open Drain Output ■ 1V Precharge on All SDA and SCL Lines ■ High Impedance SDA, SCL Pins for VCC = 0V ■ ENABLE Gates Connection from Input to Output
■ MSOP 8-Pin andUDFN (3mm × 3mm) Packages APPLICATIO S
■ Hot Board Insertion ■ Servers ■ Capacitance Buffer/Bus Extender ■ RAID Systems
LTC4303
Hot Swappable 2-Wire Bus Buffer with Stuck Bus Recovery
DESCRIPTIO
The LTC®4303 hot swappable 2-wire Bus Buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. When a connection is made, the LTC4303 provides bidirectional buffering, keeping the backplane and card capacitances isolated. If SDAOUT or SCLOUT is low for ≥ 30ms (typ), the LTC4303 automatically breaks the data and clock bus connection. At this time the LTC4303 automatically generates up to 16 clock pulses on SCLOUT in an attempt to free the bus. A connection will be enabled automatically when the bus becomes free.
Rise-time accelerator circuitry allows the use of larger pullup resistance ...
Similar Datasheet