Cascadable Amplifier
A231 / SMA231
Cascadable Amplifier 10 to 250 MHz
Rev. V3
Features
LOW NOISE FIGURE: 1.7 dB (TYP.) HIGH GAIN: 26.0...
Description
A231 / SMA231
Cascadable Amplifier 10 to 250 MHz
Rev. V3
Features
LOW NOISE FIGURE: 1.7 dB (TYP.) HIGH GAIN: 26.0 dB (TYP.) HIGH EFFICIENCY: 16 mA at +5 Vdc MEDIUM OUTPUT LEVEL: +14 dBm at +8 Vdc (TYP.)
Description
The A231 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. The 2 stage silicon bipolar feedback amplifier design displays impressive performance over a broadband frequency range. An isolation transformer is used in the feedback loop, with the benefit of high reverse isolation. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Part Number A231
SMA231 CA231 **
Package TO-8
Surface Mount SMA Connectorized
Product Image
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z0 = 50, VCC = +5 VDC
Absolute Maximum Ratings
Parameter
Frequency Small Signal Gain (min)
Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output
@ 1 dB comp. (min) IP3 IP2
Units
MHz dB dB dB dB dBm dBm dBm
Typical 25ºC 10-300 26.0 ±0.2 32 1.7
10.0
+22 +25
Guaranteed
0º to 50ºC -54º to +85ºC*
10-250
10-250
25.0 24.0
±0.5 ±0.8
2.4 2.8 9.0 8.5
Parameter
Absolute Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
125ºC
DC Voltage
+10 V
Continuous Input Power
+10 dBm
Short Term Input power (1 minute max.)
50 mW
Peak Power (3 µsec max.)
0.5 W
“S”...
Similar Datasheet