ATM0430D12F

AZ DISPLAYS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY CUSTOMER APPROVAL ※ PART NO. : ATM0430D12F (AZ DISPLAYS) VER1.0 APPROVAL COMPANY CHOP CUSTOMER COMMENTS AZ DISPLAYS ENGINEERING APPROVAL DESIGNED BY CHECKED BY APPROVED BY YGB ATM0430D12F(AZ DISPLAYS) TFT MODULE V1.0 REVISION RECORD REVISION REVISION DATE PAGE CONTENTS VER1.0 2014-6-27 FIRST ISSUE AZ DISPLAYS 1 ATM0430D12F(AZ DISPLAYS) TFT MODULE V1.0 ※ CONTENTS 1. GENERAL SPECIFICATIONS 2. PIN ASSIGNMENT 3. OPERATING SPECIFICATIONS 4. OPTICAL SPECIFICATIONS 5. RELIABILITY TEST 6. PRECAUTION FOR USING LCM 7. MECHANICAL DRAWING 8. PACKAGE DRAWING 9. INSPECTION SPECIFICATION AZ DISPLAYS 2 ATM0430D12F(AZ DISPLAYS) TFT MODULE V1.0 1. GENERAL SPECIFICATIONS Item 1. LCD size 2. Driver element 3. Resolution 4. Display mode 5. Dot Pitch (W*H) 6. Pixel pitch(W*H) 7. Active Area(W*H) 8. Module size (W*H) 9. Surface treatment 10. Bezel material 11. Color arrangement 12. Color 13. Interface 14. Weight 15. RoHS Specification 4.3 inch(Diagonal) a-Si TFT active matrix 480x(RGB)x272 Normally white , Transmissive 0.0660mm(W) x 0.1980mm(H) 0.1980mm(W) x 0.1980mm(H) 95.04mm(W) x 53.856mm(H) 105.5mm(W) x 67.2mm(H) x 2.9mm(D) Anti-glare Stainless steel RGB-stripe 16.7M 24bit RGB interface 44g(Typ.) ROHS compliant Remark Note 1 Note 1: Please refer to mechanical drawing. AZ DISPLAYS 3 ATM0430D12F(AZ DISPLAYS) TFT MODULE V1.0 2. PIN ASSIGNMENT TFT LCD Panel Driving Section FPC Connector is used for the module electr...