Document
HD74ALVC1G07
Single Buffer / Driver with Open Drain
REJ03D0109-0500 Rev.5.00
Sep 08, 2006
Description
The HD74ALVC1G07 has a buffer in a 5 pin package. Low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life.
Features
• The basic gate function is lined up as Renesas uni logic series.
• Supplied on emboss taping for high-speed automatic mounting.
• Supply voltage range : 1.2 to 3.6 V
Operating temperature range : −40 to +85°C
• All inputs VIH (Max.) = 3.6 V (@VCC = 0 V to 3.6 V)
All outputs VO (Max.) = 3.6 V (@VCC = 0 V, Output : Z)
• Output current
2 mA (@VCC = 1.2V)
4 mA (@VCC = 1.4 V to 1.6 V)
6 mA (@VCC = 1.65 V to 1.95 V)
18 mA (@VCC = 2.3 V to 2.7 V)
24 mA (@VCC = 3.0 V to 3.6 V)
• Ordering Information
Part Name
Package Type
Package Code (Previous Code)
HD74ALVC1G07VSE
VSON-5 pin
PUSN0005KA-A (TNP-5DV)
Package Abbreviation
VS
Taping Abbreviation (Quantity)
E (3,000 pcs/reel)
Outline and Article Indication
• HD74ALVC1G07
Marking
AE
VSON-5
= Control code
Rev.5.00 Sep 08, 2006 page 1 of 6
HD74ALVC1G06
Function Table
Input A H L
H: High level L: Low level Z: High impedance
Pin Arrangement
Output Y Z L
NC 1
5 VCC
IN A 2
GND 3
4 OUT Y
(Top view)
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit Conditions
Supply voltage range Input voltage range *1
VCC −0.5 to 4.6 V
VI
−0.5 to 4.6
V
Output voltage range *1, 2
VO
−0.5 to VCC+0.5 −0.5 to 4.6
Output : L V
VCC : OFF or Output : Z
Input clamp current
IIK −50 mA VI < 0
Output clamp current
IOK −50 mA VO < 0
Continuous output current
IO ±50 mA VO = 0 to VCC
Continuous current through VCC or GND
ICC or IGND
±100
mA
Maximum power dissipation at Ta = 25°C (in still air) *3
PT 200 mW
Storage temperature
Tstg −65 to 150 °C
Notes: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two
of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are
observed.
2. This value is limited to 4.6 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.5.00 Sep 08, 2006 page 2 of 6
HD74ALVC1G06
Recommended Operating Conditions
Item
Symbol
Min
Supply voltage range
VCC 1.2
Input voltage range
VI 0
Output voltage range
VO 0
Output current
IOL
Input transition rise or fall rate
∆t / ∆v
0 0
Operating free-air temperature
Ta −40
Note: Unused or floating inputs must be held high or low.
Max 3.6 3.6 3.6 2 4 6 18 24 20 10 85
Unit V V V
mA
ns / V °C
Conditions
VCC = 1.2 V VCC = 1.4 V VCC = 1.65 V VCC = 2.3 V VCC = 3.0 V VCC = 1.2 to 2.7 V VCC = 3.3±0.3 V
Electrical Characteristics
Item
Symbol VIH
VCC (V) *1 1.2
1.4 to 1.6 1.65 to 1.95
2.3 to 2.7
Min VCC×0.75 VCC×0.7 VCC×0.7
1.7
Typ
Max Unit
(Ta = −40 to 85°C)
Test Conditions
Input voltage
3.0 to 3.6
2.0
1.2
1.4 to 1.6
VIL 1.65 to 1.95
2.3 to 2.7
V
VCC×0.25 VCC×0.3 VCC×0.3 0.7
3.0 to 3.6
0.8
Output voltage Input current
Min to Max 1.2 1.4
VOL 1.65 2.3 3.0
IIN 3.6
0.2
IOL = 100 µA
0.3
IOL = 2 mA
0.3 V IOL = 4 mA
0.3
IOL = 6 mA
0.55
IOL = 18 mA
0.55
IOL = 24 mA
±5 µA VIN = 3.6 V or GND
Off state output current
IOZ 3.6
±5 µA VOUT = VCC or GND
Quiescent supply current
ICC
3.6
10 µA VIN = VCC or GND, IO = 0
Output leakage current
IOFF
0
5 µA VIN or VOUT = 0 to 3.6 V
Input capacitance
CIN
3.3
4.5 pF VIN = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Rev.5.00 Sep 08, 2006 page 3 of 6
HD74ALVC1G06
Switching Characteristics
Item
Propagation delay time
Symbol
tZL tLZ
Ta = −40 to 85°C Min Typ Max
5.5
Item
Propagation delay time
Symbol
tZL tLZ
Ta = −40 to 85°C Min Typ Max
1.0 7.0
Item
Propagation delay time
Symbol
tZL tLZ
Ta = −40 to 85°C Min Typ Max
1.0 5.0
Item
Propagation delay time
Symbol
tZL tLZ
Ta = −40 to 85°C Min Typ Max
0.5 3.5
Item
Propagation delay time
Symbol
tZL tLZ
Ta = −40 to 85°C Min Typ Max
0.5 2.5
Unit ns
Test Conditions CL = 15 pF
FROM (Input)
VCC = 1.2 V
TO (Output)
AY
Unit Test Conditions ns CL = 15 pF
VCC = 1.5±0.1 V
FROM
TO
(Input) (Output)
AY
Unit Test Conditions ns CL = 30 pF
VCC = 1.8±0.15 V
FROM
TO
(Input) (Output)
AY
Unit Test Conditions ns CL = 30 pF
VCC = 2.5±0.2 V
FROM
TO
(Input) (Output)
AY
Unit Test Conditions ns CL = 30 pF
VCC = 3.3±0.3 V
FROM
TO
(Input) (Output)
AY
Operating Characteristics
(Ta = 25°C)
Item
Symbol VCC (V)
Min
Typ
Max
Unit
Test Conditions
1.5 2.0
Power dissipation capacitance
1.8 2.0 CPD 2.5 2.5
pF f = 10 MHz
3.3 3.5
Rev.5.00 Sep 08, 2006 page 4 of 6
HD74ALVC1G06
Test Circuit
VCC
Pulse Generator
Z out = 50.