Phase Control Thyristor
DCR950D14
Phase Control Thyristor
DS6018-1 April 2011 (LN28229)
FEATURES
Double Side Cooling High Surge Capability...
Description
DCR950D14
Phase Control Thyristor
DS6018-1 April 2011 (LN28229)
FEATURES
Double Side Cooling High Surge Capability
APPLICATIONS
High Power Drives High Voltage Power Supplies Static Switches
VOLTAGE RATINGS
Part and Ordering Number
Repetitive Peak Voltages
VDRM and VRRM V
Conditions
DCR950D14 DCR950D12 DCR950D10 DCR950D08 DCR950D06
1400 1200 1000 800 600
Tvj = -40°C to 125°C, IDRM = IRRM = 50mA, VDRM, VRRM tp = 10ms, VDSM & VRSM = VDRM & VRRM +100V respectively
Lower voltage grades available.
KEY PARAMETERS
VDRM IT(AV) ITSM dV/dt*
dI/dt
1400 V 950 A 12800 A 1000 V/µs 200 A/µs
* Higher dV/dt selections available
Outline type code: D (See Package Details for further information)
ORDERING INFORMATION
When ordering, select the required part number shown in the Voltage Ratings selection table.
For example:
DCR950D14
Note: Please use the complete part number when ordering and quote this number in any future correspondence relating to your order.
Fig. 1 Package outline
www.dynexsemi.com
1/10
SEMICONDUCTOR
CURRENT RATINGS
Tcase = 60°C unless stated otherwise
Symbol
Parameter
Double Side Cooled IT(AV) Mean on-state current IT(RMS) RMS value IT Continuous (direct) on-state current
Test Conditions
Half wave resistive load -
DCR950D14
Max. Units
950 1490 1340
A A A
SURGE RATINGS
Symbol
Parameter
ITSM Surge (non-repetitive) on-state current I2t I2t for fusing
Test Conditions 10ms half sine, Tcase = 125°C
VR = 0
Max. 12.8 0.819
Units
kA MA2s
T...
Similar Datasheet