U U
OBSOLETE:
FOR INFORMATION PURPOSES ONLY
Contact Linear Technology for Potential Replacement
FEATURES
■ Two Regulate...
U U
OBSOLETE:
FOR INFORMATION PURPOSES ONLY
Contact Linear Technology for Potential Replacement
FEATURES
■ Two Regulated Outputs: 12V at 3A 5V at 75mA
■ 2% Output Voltage Tolerance ■ 60dB Ripple Rejection ■ 0.7% Load Regulation ■ TTL and CMOS Compatible Logic Control ■ 100% Thermal Burn-In on All Devices
U APPLICATIO S
■ Power Supply Sequencing ■ Remote On/Off Power Control ■ Selective System Power During Emergency
Power Operation ■ Memory Power Supply with Back-Up
LT1036
Logic Controlled
Regulator
DESCRIPTIO
The LT®1036 features two positive
regulators in the same package. The 12V main
regulator offers excellent performance while supplying load currents up to 3A, and the 5V auxiliary
regulator provides similar performance while supplying lighter loads of 75mA. The main
regulator has the additional feature of being under the shutdown control of a logic signal. When the enable pin is taken to a low logic level, the main
regulator shuts down and its output voltage goes to near 0V. During this command, the auxiliary output is unaffected by the main
regulator’s condition and continues to provide a 5V output.
The main output has current and power limiting combined with thermal shutdown to make it virtually blowout proof. The auxiliary output is not affected by the thermal shut down mechanism or the state of the main output, allowing it to be used as a back-up in case of overloads or shorts on the main supply.
The logic input of the LT1036 (enable pin) has a 1.6V threshold and ca...