SODZ ***A -SH Series
Feature
GLASS PASSIVATED JUNCTION Zener voltage regulator diodes 1.0 Watt Steady State
* 1 W SOD...
SODZ ***A -SH Series
Feature
GLASS PASSIVATED JUNCTION Zener voltage
regulator diodes 1.0 Watt Steady State
* 1 W SOD-123-FL * Zener voltage
regulator diodes * Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* We declare that the material of product compliance with RoHS requirements.
* Guarding for over voltage protection
* High temperature soldering guaranteed:
260°C/10 seconds at terminals * IEC61000-4-2 ESD Air Contact≥±15KV * MSL: 1
Mechanical Data
Case: JEDEC SOD-123-FL/MINI SMA molded plastic Terminals :Plated terminals, solderable per
MIL-STD-750,Method 2026 Polarity: Color band denoted cathode except Bipolar Mounting Position: Any Weight : Approximated 0.0155 gram
1.Electrical Characteristic
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
RATING
Steady State Power Dissipation at TL=75°C(Note1)
Z-current
Peak Forward Surge Current, 8.3ms Single Half SineWave Superimposed on Rated Load(JECED Method) (Note 2)
We declare that the material of product is Haloggen free (green epoxy compound)
SYMBOL PM(AV) IZ
VALUE 1.0
PV/VZ
IFSM
40
UNITS Watts
mA
Amps
Operating and Storage Temperature Range
TJ,TSTG
NOTES: 1. 8.0mm2 (.013mm thick) land areas 2. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
-50 to +150
°C
SODZ ***A -SH Series
2.Product Characteristic
Vz tolerance : ±5%; Tested with pulese ...