DatasheetsPDF.com

MAU317 Dataheets PDF



Part Number MAU317
Manufacturers Minmax Technology
Logo Minmax Technology
Description Single & Dual Output DC/DC Converters
Datasheet MAU317 DatasheetMAU317 Datasheet (PDF)

FEATURES ►SIP Package with Industry Standard Pinout ►Package Dimension: 19.5 x 10.2 x 7.6 mm (0.77”x 0.4”x 0.3”) ►Single and Dual Output Models ►I/O-Isolation 1000 VDC ►Operating Temp. Range -40°C to +85°C ►3 Years Product Warranty MAU300 SERIES DC/DC CONVERTER 2W, SIP-Package PRODUCT OVERVIEW The MINMAX MAU300 series is a range of 2W DC/DC converters in a small SIP Package featuring an I/O-isolation of 1000VDC. An excellent efficiency allows an operating temperature range of –40°C to +85°C. T.

  MAU317   MAU317


Document
FEATURES ►SIP Package with Industry Standard Pinout ►Package Dimension: 19.5 x 10.2 x 7.6 mm (0.77”x 0.4”x 0.3”) ►Single and Dual Output Models ►I/O-Isolation 1000 VDC ►Operating Temp. Range -40°C to +85°C ►3 Years Product Warranty MAU300 SERIES DC/DC CONVERTER 2W, SIP-Package PRODUCT OVERVIEW The MINMAX MAU300 series is a range of 2W DC/DC converters in a small SIP Package featuring an I/O-isolation of 1000VDC. An excellent efficiency allows an operating temperature range of –40°C to +85°C. These converters offer an economical solution for many applications where a voltage has to be isolated i.e for noise reduction, ground loop elimination, digital interfaces or for board level power distribution with isolated voltages. Model Selection Guide Model Input Number Voltage (Range) MAU301 VDC MAU302 MAU303 MAU304 MAU305 5 (4.5 ~ 5.5) MAU306 MAU307 MAU311 MAU312 MAU313 MAU314 MAU315 12 (10.8 ~ 13.2) MAU316 MAU317 MAU321 MAU322 MAU323 MAU324 MAU325 24 (21.6 ~ 26.4) MAU326 MAU327 Output Voltage VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 Output Current Max. Min. mA mA 500 10 400 8 165 3 133 2.5 ±200 ±4 ±83 ±1.5 ±66 ±1 500 10 400 8 165 3 133 2.5 ±200 ±4 ±83 ±1.5 ±66 ±1 500 10 400 8 165 3 133 2.5 ±200 ±4 ±83 ±1.5 ±66 ±1 Input Current @Max. Load mA(typ.) 452 526 495 499 519 504 501 185 212 200 200 210 201 200 92 108 101 101 105 102 100 @No Load mA(typ.) 60 30 15 Load Max. capacitive Regulation Load % (max.) 11 11 7 7 10 7 7 8 8 5 5 8 5 5 8 8 5 5 8 5 5 µF 470 390# 470 390# 470 390# # For each output Efficiency (typ.) @Max. Load % 73 76 80 80 77 79 79 74 78 82 83 79 82 82 74 77 81 82 79 81 82 Input Specifications Parameter Input Voltage Range Input Surge Voltage (1 sec. max.) Reverse Polarity Input Current Internal Filter Type Internal Power Dissipation Model 5V Input Models 12V Input Models 24V Input Models 5V Input Models 12V Input Models 24V Input Models All Models Min. Typ. Max. Unit 4.5 5 5.5 10.8 12 13.2 21.6 -0.7 24 --- 26.4 9 VDC -0.7 --- 18 -0.7 --- 30 --- --- 0.3 A Pi Filter --- --- 650 mW E-mail:[email protected] Tel:886-6-2923150 2013/01/23 REV:4 Page 1 of 4 MAU300 SERIES DC/DC CONVERTER 2W, SIP-Package Output Specifications Parameter Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation Ripple & Noise Temperature Coefficient Short Circuit Protection Conditions Dual Output, Balanced Loads For Vin Change of 1% Io=20% to 100% max. 20MHz Bandwidth Min. Typ. Max. Unit --- ±1.0 ±3.0 % --- ±0.1 ±1.0 % --- ±1.2 ±1.5 % See Model Selection Guide --- 100 150 mV P-P --- ±0.01 ±0.02 %/℃ 0.5 Second Max. General Specifications Parameter I/O Isolation Voltage (rated) I/O Isolation Resistance I/O Isolation Capacitance Switching Frequency MTBF (calculated) Conditions 60 Seconds 500 VDC 100KHz, 1V MIL-HDBK-217F@25℃, Ground Benign Min. 1000 1000 --50 2,000,000 Typ. ----80 80 --- Max. Unit --- VDC --- MΩ 120 pF 100 KHz --- Hours Input Fuse 5V Input Models 1000mA Slow-Blow Type 12V Input Models 500mA Slow-Blow Type 24V Input Models 200mA Slow-Blow Type Environmental Specifications Parameter Operating Ambient Temperature Range (See Power Derating Curve) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) Conditions Natural Convection Min. -40 ---50 --Free-Air convection --- Max. +85 +90 +125 95 260 Unit ℃ ℃ ℃ % rel. H ℃ Power Derating Curve Output Power (%) Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 Ripple & Noise measurement bandwidth is 0-20MHz. 3 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 4 All DC/DC converters should be externally fused at the front end for protection. 5 Other input and output voltage may be available, please contact factory. 6 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 7 Specifications are subject to change without notice. E-mail:[email protected] Tel:886-6-2923150 2013/01/23 REV:4 Page 2 of 4 Package Specifications Mechanical Dimensions 19.5 [0.77] 0.5 [0.02] 10.2 [0.40] 3.2 [0.13] 0.5 [0.02] 2.4 [0.09] 2.54 5.08 [0.10] [0.20] 2X2.54 [2X0.10] 18.5 [0.73] Bottom View 12 456 0.50 [0.02] 7.6 [0.30] 0.25 [0.01] 1.3 [0.05] Physical Characteristics Case Size : 19.5x7.6x10.2mm (0.77x0.30x0.40 inches) Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Pin Material : Alloy 42 Weight : 2.7g MAU300 SERIES DC/DC CONVERTER 2W, SIP-Package Pin Connections Pin Single Output 1 +Vin 2 -Vin 4 -Vout 5 No Pin 6 +Vout Dual Output +Vin -Vin -Vout Common +Vout ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ► Pins ±0.05(±0.002) E-mail:sale.


MAU321 MAU317 MAU316


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)