SMART POWER 3-PHASE MOTOR DRIVE HYBRID
MIL-PRF-38534 AND 38535 CERTIFIED FACILITY
10 AMP, 75 VOLT MOSFET SMART POWER 3-PHASE
MM..SS..KKEENNNNEDEYDYCOCROPR. P...
Description
MIL-PRF-38534 AND 38535 CERTIFIED FACILITY
10 AMP, 75 VOLT MOSFET SMART POWER 3-PHASE
MM..SS..KKEENNNNEDEYDYCOCROPR. P.
MOTOR DRIVE HYBRID
4707 Dey Road Liverpool, N.Y. 13088
FEATURES:
75V, 10 Amp Capability Ultra Low Thermal Resistance - Junction to Case - 1.5°C/W (Each MOSFET) Self-Contained, Smart Lowside/Highside Drive Circuitry Bootstrap High-Side Supplies Under-Voltage Lockout Capable of Switching Frequencies to 25KHz Isolated Case Allows Direct Heat Sinking Bolt-down Design Allows Superior Heat Dissipation Contact MSK for MIL-PRF-38534 Qualification Status
4303
(315) 701-6751
DESCRIPTION:
The MSK 4303 is a 10 Amp, 3 Phase Bridge Smart Power Motor Drive Hybrid with a 75 volt rating on the output switches. The output switches are MOSFETs. This new smart power motor drive hybrid is 5.0 volt input logic compatible. Under-voltage lockout shuts down the bridge when the supply voltage gets to a point of incomplete turn-on of the output switches. The internal high-side bootstrap power supply derived from the +VB supply completely eliminates the need for 3 floating independent power supplies.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS TYPICAL APPLICATIONSPIN-OUT INFORMATION
3 PHASE SIX STEP DC BRUSHLESS MOTOR DRIVE OR 3 PHASE SINUSOIDAL INDUCTION MOTOR DRIVE
1
PIN-OUT INFORMATION
1 H INA 2 L INA 3 +VCC 4 H INB 5 L INB 6 COM 7 COM 8 +VB 9 H INC 10 L INC
20 V+ 19 N/C 18 AV17 AØ 16 N/C 15 BV14 BØ 13 N/C 12 CV11 CØ 8548-109 Rev. E 11/13
ABSOLUTE MAXIMUM RATINGS 6
V+ ...
Similar Datasheet