Double channel high-side driver
VND7040AJ
Double channel high-side driver with MultiSense analog feedback for automotive applications
Datasheet - produ...
Description
VND7040AJ
Double channel high-side driver with MultiSense analog feedback for automotive applications
Datasheet - production data
Features
Max transient supply voltage Operating voltage range Typ. on-state resistance (per Ch) Current limitation (typ) Standby current (max)
VCC VCC RON ILIMH ISTBY
40 V 4 to 28 V
40 mΩ 34 A 0.5 µA
AEC-Q100 qualified General
− Double channel smart high-side driver with MultiSense analog feedback
− Very low standby current − Compatible with 3 V and 5 V CMOS
outputs MultiSense diagnostic functions
− Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
− Overload and short to ground (power limitation) indication
− Thermal shutdown indication − OFF-state open-load detection
− Output short to VCC detection − Sense enable/disable
Protections − Undervoltage shutdown
− Overvoltage clamp − Load current limitation
− Self limiting of fast thermal transients − Configurable latch-off on
overtemperature or power limitation with dedicated fault reset pin
− Loss of ground and loss of VCC − Reverse battery with external
components − Electrostatic discharge protection
Applications
All types of Automotive resistive, inductive and capacitive loads
Specially intended for automotive signal lamps (up to P27W or SAE1156 and R5W paralleled or LED rear combinations)
Description
The device is a double channel high-side driver manufactured using ST proprietary VIPower®...
Similar Datasheet