P600A, P600B, P600D, P600G, P600J, P600K, P600M
www.vishay.com
Vishay General Semiconductor
General Purpose Plastic Rectifier
P600
FEATURES • Low forward voltage drop • Low leakage current • High forward current capability • High forward surge capability • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
IF(AV) VRRM
6.0 A
50 V, 100 V, 200 V, 400 V, 600 V, 800 V, 1000 V
IFSM VF IR TJ max. Package
400 A 0.9 V, 1.0 V
5.0 μA 150 °C P600
Diode variations
Single die
TYPICAL APPLICATIONS For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes application.
MECHANICAL DATA Case: P600, void-free molded epoxy body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL P600A P600B P600D P600G P600J P600K P600M UNIT
Max. repetitive peak reverse voltage
Max. RMS voltage
Max. DC blocking voltage
Max. average forward rectified current at
TA = 60 °C, 0.375" (9.5 mm) lead length (fig. 1)
TL = 60 °C, 0.125" (3.18 mm) lead length (fig. 2)
Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load
VRRM VRMS VDC
IF(AV)
IFSM
50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 600 800 1000 V
6.0 A
22
400 A
Operating junction and storage temperature range TJ, TSTG
- 50 to + 150
°C
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS SYMBOL P600A P600B P600D P600G
Max. instantaneous forward voltage
6.0 A 100 A
VF
0.90 1.30
Max. DC reverse current at rated DC blocking voltage
Typical reverse recovery time
Typical junction capacitance
TA = 25 °C
TA =100 °C
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A
4.0 V, 1 MHz
IR
trr CJ
5.0 1.0 2.5 150
P600J
P600K
P600M 1.0 1.4
UNIT
V
μA mA μs pF
Revision: 13-Aug-13
1 Document Number: 88692
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P600A, P600B, P600D, P600G, P600J, P600K, P600M
www.vishay.com
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL P600A P600B P600D P600G P600J P600K P600M UNIT
Typical thermal resistance
RJA (1) RJL (1)
20 °C/W
4.0
Note
(1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, PCB mounted with 1.1" x 1.1" mm x 30 mm) copper pads
(30
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE
P600J-E3/54
2.1
54
P600J-E3/73
2.1
73
BASE QUANTITY 800 300
DELIVERY MODE 13" diameter paper tape and reel
Ammo pack packaging
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Average Forward Rectified Current (A)
6.0 60 Hz Resistive
5.0 or Inductive Load
4.0
3.0
2.0 1.1" x 1.1" (30 mm x 30 mm) Copper Pads
1.0 Standard P.C.B. Mounting
0.375" (9.5 mm) Lead Length 0
0 20 40 60 80 100 120 140 160 180 200 Ambient Temperature (°C)
Fig. 1 - Max. Forward Current Derating Curve
Peak Forward Surge Current (A)
600 8.3 ms Single Half Sine-Wave
500
400
300 TA = 150 °C
200
TA = 25 °C
100
0 1 10 100 Number of Cycles at 60 Hz
Fig. 3 - Typical Instantaneous Forward Characteristics
Average Forward Current (A)
30
25 20 15 10
LLL===0L00..=63.22705.551"""2(65((9."13.(5553..1mm88mmmm))mm) )
60 Hz Resistive or Inductive Load
Both Leads Attached to Heat Sinks with
Length as Shown “L”
5
0 0 20 40 60 80 100 120 140 160 180 200 Lead Temperature (°C)
Fig. 2 - Max. Non-repetitive Forward Surge Current
Instantaneous Forward Current (A)
100
10 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle
1
0.1
0.01 0.4
0.6 0.8 1.0 1.2 1.4 Instantaneous Forward Voltage (V)
1.6
Fig. 4 - Typical Instantaneous Forward Characteristics
Revision: 13-Aug-13
2 Document Number: 88692
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P600A, P600B, P600D, P600G, P600J, P600K, P600M
www.vishay.com
Vishay General Semiconductor
100 100
Instantaneous Reverse Current (μA) Transient Thermal Impedance (°C/W)
10 TJ = 125 °C
TJ = 100 °C 1
TJ = 25 °C 0.1
10 1
0.01 0
20 40 60 80 100
Percent of Rated Peak Reverse Voltage (%)
Fig. 5 - Typical Reverse Characteristics
PACKAGE OUTLINE DIMENSIONS in inches (m.