Hybrid IC
HYBRID IC
VLA526A-06AR
Hybrid IC for driving IGBT modules
DESCRIPTION
The VLA526A-06AR is the 6-element gate driver fo...
Description
HYBRID IC
VLA526A-06AR
Hybrid IC for driving IGBT modules
DESCRIPTION
The VLA526A-06AR is the 6-element gate driver for a
OUTLINE DRAWING
Dimensions: mm
400VAC 3 phase inverter. 3 circuits of high side are isolated between input and output and the power supplies consist of the
88.0MAX
Mark
inside. This Hybrid IC can be driven by input voltage of 2 lines
(+15V and +5V). By connecting the resistor for current detection
41.5MAX
between B-N, this Hybrid IC can detect an over-current, and can
cut off each gate signal.
The low side of an input part has a timing revision circuit that
can revise time lag with the signal of high side and this hybrid IC can realize the optimum inverter drive.
Recommended IGBT module: VCES=1200V/ up to 25A class
FEATURES
2.54 7.5MAX
30
0.5 +0.15/-0.1
7.5MAX
1
4.0MAX
3.5+/-0.7
0.25 +0.2/-0.1
9.5MAX 13.0MAX
Supply voltage ···································+5V, +15V
High side isolation voltage············· 2500Vrms, for 1 min
The power supply for a high side gate drive and the electrolysis capacitor for voltage compensation are unnecessary.
SIL structure, 6-circuit driver built-in, it saves area on mother board.
Recommended switching frequency range is up to 3kHz.
APPLICATIONS
IGBT drive for 3 phase inverter etc.
BLOCK DIAGRAM
UP 19 VP 20 WP 21
Oscillator Oscillator Oscillator
Buffer Buffer Buffer
Comparator with
hysteresis
Drive circuit
Comparator with
hysteresis
Drive circuit
Comparator with
hysteresis
Drive circu...
Similar Datasheet
- VLA526A-06AR Hybrid IC - Isahaya Electronics Corporation