Document
Continental Device India Limited
An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company
HIGH EFFICIENCY RECTIFIER
HER101- HER108
DO-41 (Plastic) Axial Lead Plastic Package
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at Ta=25oC Ambient Temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%
DESCRIPTION
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage
SYMBOL HER HER HER HER HER HER HER HER 101 102 103 104 105 106 107 108
VRRM 50 100 200 300 400 600 800 1000 VRMS 35 70 140 210 280 420 560 700 VDC 50 100 200 300 400 600 800 1000
Maximum Average Forward Rectified Current
0.375" (9.5mm) Lead Length at Ta=55ºC
IF(AV)
Peak Forward Surge Current, 8.3ms single
half sine wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 1.0A at 25ºC
Maximum Reverse Current
at Ta=25oC
at Rated DC Blocking Voltage Ta=100oC
Typical Junction Capacitance
Maximum Reverse Recovery Time
Typical Thermal Resistance
IFSM
VF IR
*CJ **TRR ***Rth (j-a)
1.0
1.0 50
30
1.3 5.0 500 17
60
1.7 75
Operating and Storage Temperature Range TJ, Tstg
- 55 to +150
UNIT
V V V
A
A
V µA µA pF ns oC/W oC
*Measured at 1MHz and applied reverse voltage of 4.0 V
**Reverse recovery test conditions IF=0.5A, IR=1A, IRR=0.25A ***Thermal resistance junction to Ambient and from junction to lead length 0.375" (9.5mm) PCB mounted
HER101_108 Rev240106E
Continental Device India Limited
Data Sheet
Page 1 of 5
HER101- HER108
DO-41 (Plastic) Axial Lead Plastic Package
HER101_108 Rev240106E
Continental Device India Limited
Data Sheet
Page 2 of 5
HER101- HER108
DO-41 (Plastic) Axial Lead Plastic Package
HER101_108 Rev240106E
Continental Device India Limited
Data Sheet
Page 3 of 5
HER101- HER108
DO-41 (Plastic) Axial Lead Plastic Package
HER101_108 Rev240106E
Continental Device India Limited
Data Sheet
Page 4 of 5
Customer Notes
HER101- HER108
DO-41 (Plastic) Axial Lead Plastic Package
Component Disposal Instructions
1. CDIL Semiconductor Devices are RoHS compliant, customers are requested to please dispose as per prevailing Environmental Legislation of their Country.
2. In Europe, please dispose as per EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
Disclaimer
The product information and the selection guides facilitate selection of the CDIL's Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CD.