180/181RKI Series
Vishay High Power Products
Phase Control Thyristors (Stud Version), 180 A
FEATURES
• Hermetic glass-metal seal • International standard case TO-209AB (TO-93) • RoHS compliant
RoHS
COMPLIANT
• Designed and qualified for industrial level
TO-209AB (TO-93)
PRODUCT SUMMARY
IT(AV)
180 A
TYPICAL APPLICATIONS • DC motor controls • Controlled DC power supplies • AC controllers
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
TEST CONDITIONS
IT(AV) IT(RMS) ITSM
I2t VDRM/VRRM tq TJ
TC
50 Hz 60 Hz 50 Hz 60 Hz
Typical
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
TYPE NUMBER
VOLTAGE CODE
180/181RKI
40 80 100
VDRM/VRRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE
V
400
800
1000
VALUES 180 80 285 3800 4000 72 66
400 to 1000 100
- 40 to 125
VRSM, MAXIMUM NON-REPETITIVE PEAK VOLTAGE
V 500 900 1100
UNITS A °C A A
kA2s V µs °C
IDRM/IRRM MAXIMUM AT TJ = TJ MAXIMUM
mA
30
Document Number: 93699 Revision: 05-Jun-08
For technical questions, contact:
[email protected]
www.vishay.com 1
180/181RKI Series
Vishay High Power Products Phase Control Thyristors
(Stud Version), 180 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Maximum average on-state current at case temperature
IT(AV)
Maximum RMS on-state current
IT(RMS)
Maximum peak, one-cycle non-repetitive surge current
ITSM
Maximum I2t for fusing
I2t
Maximum I2√t for fusing Low level value of threshold voltage High level value of threshold voltage Low level value of on-state slope resistance High level value of on-state slope resistance Maximum on-state voltage Maximum holding current Typical latching current
I2√t VT(TO)1 VT(TO)2
rt1 rt2 VTM IH IL
TEST CONDITIONS
180° conduction, half sine wave
DC at 79 °C case temperature
t = 10 ms t = 8.3 ms
No voltage reapplied
t = 10 ms t = 8.3 ms t = 10 ms t = 8.3 ms
100 % VRRM reapplied
No voltage reapplied
Sinusoidal half wave, initial TJ = TJ maximum
t = 10 ms t = 8.3 ms
100 % VRRM reapplied
t = 0.1 to 10 ms, no voltage reapplied
(16.7 % x π x IT(AV) < I < π x IT(AV)), TJ = TJ maximum (I > π x IT(AV)), TJ = TJ maximum (16.7 % x π x IT(AV) < I < π x IT(AV)), TJ = TJ maximum (I > π x IT(AV)), TJ = TJ maximum Ipk = 570 A, TJ = TJ maximum, tp = 10 ms sine pulse
TJ = 25 °C, anode supply 12 V resistive load
VALUES 180 80 285 3800 4000 3500 3660 72 66 61 56 720 0.83 0.89 0.92 0.81 1.35 600 1000
UNITS A °C A
A
kA2s
kA2√s V mΩ V mA
SWITCHING
PARAMETER Maximum non-repetitive rate of rise of turned-on current
Typical delay time
Typical turn-off time
SYMBOL dI/dt td tq
TEST CONDITIONS
Gate drive 20 V, 20 Ω, tr ≤ 1 µs TJ = TJ maximum, anode voltage ≤ 80 % VDRM
Gate current 1 A, dIg/dt = 1 A/µs Vd = 0.67 % VDRM, TJ = 25 °C ITM = 50 A, TJ = TJ maximum, dI/dt = 10 A/µs, VR = 100 V, dV/dt = 20 V/µs
VALUES UNITS
300 A/µs
1.0 µs
100
BLOCKING
PARAMETER
Maximum critical rate of rise of off-state voltage
Maximum peak reverse and off-state leakage current
SYMBOL
dV/dt
IRRM, IDRM
TEST CONDITIONS TJ = TJ maximum linear to 80 % rated VDRM TJ = TJ maximum, rated VDRM/VRRM applied
VALUES UNITS 500 V/µs 30 mA
www.vishay.com 2
For technical questions, contact:
[email protected]
Document Number: 93699 Revision: 05-Jun-08
180/181RKI Series
Phase Control Thyristors Vishay High Power Products
(Stud Version), 180 A
TRIGGERING
PARAMETER Maximum peak gate power Maximum average gate power Maximum peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage
DC gate current required to trigger
DC gate voltage required to trigger
DC gate current not to trigger
DC gate voltage not to trigger
SYMBOL
TEST CONDITIONS
PGM PG(AV)
IGM +VGM -VGM
IGT
VGT
IGD
VGD
TJ = TJ maximum, tp ≤ 5 ms TJ = TJ maximum, f = 50 Hz, d% = 50 TJ = TJ maximum, tp ≤ 5 ms
TJ = TJ maximum, tp ≤ 5 ms
TJ = - 40 °C TJ = 25 °C TJ = 125 °C TJ = - 40 °C TJ = 25 °C TJ = 125 °C
TJ = TJ maximum
Maximum required gate trigger/ current/voltage are the lowest value which will trigger all units 12 V anode to cathode applied
Maximum gate current/voltage not to trigger is the maximum value which will not trigger any unit with rated VDRM anode to cathode applied
VALUES TYP. MAX.
10 2.0 3.0 20 5.0 130 65 150 35 2.0 1.2 2.5 0.9 -
UNITS W A V
mA
V
10 mA
0.25 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum operating junction temperature range
TJ
Maximum storage temperature range
Maximum thermal resistance, junction to case
TStg RthJC
DC operation
Maximum thermal resistance, case to heatsink
RthCS
Mounting surface, smooth, flat and greased
Mounting torque, ± 10 %
Non-lubricated threads Lubricated threads
Approximate weight Case style
See dimensions - link at the end of datasheet
VALUES
UNITS
- 40 to 125 - 40 to 150
°C
0.15 K/W
0.04
31 (275)
24.5 (210)
N·m (lbf ⋅ in)
280 g
TO-209AB (TO-93)
ΔRthJC CONDUCTION
CONDUCTION ANGLE
SINUSOIDAL CONDUCTION
RECTANGULAR CONDUCTION
TEST CONDITIONS
180°
0.050
0.032
120°
0.063
0.059
90° 0.080 60° 0.118
.