www.vishay.com
SBL8L40, SBLF8L40, SBLB8L40
Vishay General Semiconductor
Schottky Barrier Rectifier
TO-220AC
ITO-220AC
SBL8L40
PIN 1
PIN 2
2 1
CASE
TO-263AB K
SBLF8L40
PIN 1
PIN 2
2 1
1 SBLB8L40
PIN 1
2
K
PIN 2
HEATSINK
PRIMARY CHARACTERISTICS
IF(AV) VRRM IFSM
VF TJ max.
8A 40 V 250 A 0.41 V 125 °C
FEATURES • Guardring for overvoltage protection • Lower power losses, high efficiency • Low forward voltage drop • High forward surge capability • High frequency operation • Meets MSL level 1, per J-STD-020C, LF maximum peak of
245 °C (for TO-263AB package) • Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AC and ITO-220AC package) • Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters and polarity protection application.
MECHANICAL DATA Case: TO-220AC, ITO-220AC, TO-263AB Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum repetitive peak reverse voltage
Working peak reverse voltage
Maximum DC blocking voltage Maximum average forward rectified current at (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per leg
VRRM VRWM VDC IF(AV)
IFSM
Peak repetitive reverse current at tp = 2 ms, 1 kHz Voltage rate of change (rated VR) Operating junction and storage temperature range
Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min
IRRM dV/dt TJ, TSTG
VAC
VALUE 40 28 40 8
250
1.0 10 000 - 65 to + 125
1500
UNIT V
A V/μs °C
V
Revision: 15-Jun-12
1 Document Number: 88825
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
SBL8L40, SBLF8L40, SBLB8L40
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum instantaneous forward voltage
VF (1)
Maximum instantaneous reverse current at DC blocking voltage
IR (2)
IF = 4 A IF = 4 A IF = 8 A IF = 8 A
Rated VR
TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 100 °C
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms
VALUE 0.44 0.35 0.50 0.41 1.0 75
UNIT V mA
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
SBL
Typical thermal resistance from junction to case per leg
RJC
3.2
SBLF 4.0
SBLB 3.2
UNIT °C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
TO-220AC
SBL8L40-E3/45
ITO-220AC
SBLF8L40-E3/45
TO-263AB
SBLB8L40-E3/45
TO-263AB
SBLB8L40-E3/81
TO-220AC
SBL8L40HE3/45 (1)
ITO-220AC
SBLF8L40HE3/45 (1)
TO-263AB
SBLB8L40HE3/45 (1)
TO-263AB
SBLB8L40HE3/81 (1)
Note (1) AEC-Q101 qualified
1.80 1.94 1.33 1.33 1.80 1.94 1.33 1.33
PACKAGE CODE 45 45 45 81 45 45 45 81
BASE QUANTITY 50/tube 50/tube 50/tube 800/reel 50/tube 50/tube 50/tube 800/reel
DELIVERY MODE Tube Tube Tube
Tape and reel Tube Tube Tube
Tape and reel
Revision: 15-Jun-12
2 Document Number: 88825
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Average Forward Rectified Current (A)
10
8 SBL8L40 SBLB8L40
6
SBLF8L40 4
2
0 0
50 100 150
Case Temperature (°C)
Fig. 1 - Maximum Forward Current Derating Curve
100
TA = 125 °C 10
1 TA = 25 °C
Instantaneous Forward Current (A)
0.1
Instantaneous Reverse Current (μA)
0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Instantaneous Forward Voltage (V)
Fig. 2 - Typical Instantaneous Forward Characteristics
105
104 TA = 125 °C
103 TA = 75 °C
102
10 TA = 25 °C
1
0.1 0
20 40 60 80 100
Reverse Voltage (V) Fig. 3 - Typical Reverse Characteristics
SBL8L40, SBLF8L40, SBLB8L40
Vishay General Semiconductor
10 000
Junction Capacitance (pF)
1000
100 0.1
1 10 100 Reverse Voltage (V) Fig. 4 - Typical Junction Capacitance
10
Thermal Impedance (°C/W)
1 0.01 0.1 1 10 100
Heating Time (s)
Fig. 5 - Transient Thermal Impedance
Revision: 15-Jun-12
3 Document Number: 88825
For technical questions within yo.