V23086-C1001-A403

V23086 series 20 Amp Micro K (Single & Dual) PC Board Relay for Automotive Applications Features 30A, 16VDC switching rating. 40A inrush at 16VDC. 20A continuous contact rating @ 85°C. Immersion cleanable plastic case with knock-off nib for ventilation. 60% less volume than other comparable power relays. 1 Form A and 1 Form C arrangements in single and dual relay packages. Choice of AgNi 0.15 or AgSnO contacts. Operate Data Must Operate and Must Release Voltage: See Coil Data table. Initial Operate Time: 3 milliseconds, typical, with rated coil voltage applied. Initial Release Time: 1.5 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage.) Conditions All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH, 29.5 ± 1.0" Hg.) unless otherwise noted. Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT) in single relay and dual relay configurations. Material: AgNi 0.15 - Recommended for inductive loads. AgSnO - Recommended for high inrush, lamp and capacitive loads and applications prone to contact material transfer. Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Max. Load Current (@ 14VDC Load Voltage): Load Form A (NO) Form C NO NC Max. Continuous Current Max. Break Current Max. Make Current AgSnO AgNi 0.15 30A ...