UGP10A

UGP10A-UGP10K Super Fast Rectifiers VOLTAGE RANGE: 50 --- 800 V CURRENT: 1.0 A Features Low cost Diffusde junction Low leakage low leakage current Easily cleaned with alcohol,Isopropanol and similar solvents Plastic package has underwriters laboratory z flammability classification 94v-0 DO - 41 Mechanical Data Case:JEDEC DO--41,molded plastic Polarity: Color band denotes cathode Weight: 0.012 ounces,0.34 grams Mounting position: Any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60Hz,resistive or inductive load. For capacitive load,derate by 20%. UGP UGP UGP UGP 10A 10B 10D 10F UGP 10G UGP 10J UGP UNITS 10K Maximumrecurrent peak reverse voltage MaximumRMS voltage MaximumDC blocking voltage VRRM VRMS VDC Maximumaverage forw ard rectified current 9.5mmlead length, @TA=75 Peak forw ard surge current IF(AV) 8.3ms single half-sine-w ave IFSM superimposed on rated load @TJ=125 Maximuminstantaneous forw ard voltage @ 1.0A VF Maximumreverse current @TA=25 at rated DC blocking voltage @TA=100 IR Maximumreverse recovery time (Note1) trr Typical junction capacitance (Note2) CJ Typical thermal resistance (Note3) RθJA Operating junction temperature range TJ Storage temperature range TSTG NOTE: 1. Measured with IF=0.5A, IR=1A, Irr=0.25A. 2. Measured at 1.0MHz and applied rev erse v oltage of 4.0V DC. 3.Thermal resistance junction to ambient. 50...