SURFACE MOUNT ULTRAFAST GLASS PASSIVATED RECTIFIER
MURS260-A
SURFACE MOUNT ULTRAFAST
GLASS PASSIVATED RECTIFIER
VOLTAGE:600V
CURRENT: 2.0A
FEATURE
Ideal for surface m...
Description
MURS260-A
SURFACE MOUNT ULTRAFAST
GLASS PASSIVATED RECTIFIER
VOLTAGE:600V
CURRENT: 2.0A
FEATURE
Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Ultrafast recovery time for high efficiency
MECHANICAL DATA
Terminal:Solder plated, solderable per MIL-STD-750, Method 2026
Case:JEDEC DO-214AC molded plastic body over passivated chip
Polarity:Color band denotes cathode Marking:M260A
SMA/DO-214AC Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20%)
SYMBOL
MURS260-A
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage Maximum DC blocking Voltage
Maximum Average Forward Rectified
Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage atrated Forward current
Maximum Reverse Recovery Time
(Note 1)
Maximum DC Reverse Current at rated DC blocking voltage
Ta =25℃ Ta =150℃
Typical Junction Capacitance
(Note 2)
Vrrm Vrms Vdc If(av) Ifsm
Vf Trr Ir
Cj
600 420 600 2.0
35.0
1.45 50 5.0 150.0 30.0
Typical Thermal Resistance
(Note 3) Rth(jl)
13.0
Storage and Operating Temperature
Tj, Tstg
-50 to +150
Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHZ and...
Similar Datasheet