LED Driver control IC
STRUCTURE
Silicon Monolithic Integrated Circuit
NAME OF PRODUCT LED Driver control IC
TYPE BD9211F
FEATURE
・ Using ...
Description
STRUCTURE
Silicon Monolithic Integrated Circuit
NAME OF PRODUCT LED Driver control IC
TYPE BD9211F
FEATURE
・ Using 20V high-voltage-withstand process
・ 1Channel Push-Pull control ・ Current and voltage feedback is controlled
by drive frequency modulation ・ Built-in soft start circuit ・ Built-in timer latch circuit ・ Built-in shut down protection ・ Built-in UVLO detection circuit ・ Output Over Voltage Protection ・ Built-in error signal output function ・ Switching to current consumption save mode through STB pin ・ Possible to control the burst by external PWM
1/4
○Absolute Maximum Ratings (Ta=25℃)
Item
Symbol
Rated voltage
Unit
Power supply voltage
VCC
20
V
Driver Output Operating temperature Storage temperature range
Maximum Junction Temperature
N1,N2 Topr Tstg Tjmax
20 -40~+85 -55~+150
+150
V ℃ ℃ ℃
Power Dissipation
Pd
687*
mW
* It reduces gradually by 5.5 mW/℃ if above Ta= 25℃ (when mounting the board of 70.0mm×70.0mm×1.6mm)
Recommended Operation Ranges
Item Power Supply
PWMIN input frequency range
Output frequency
Symbol VCC
F_PWMIN FOUT
Range 8.0~18.0 60~500 25~200
Unit V Hz
kHz
REV. A
○Electrical Characteristics (VCC=12V, Ta=25℃)
Parameter
((WHOLE DEVICE)) Circuit current during operation Circuit current during stand by operation
((STAND BY CONTROL)) Stand-by voltage H Stand-by voltage L
((VCC UVLO BLOCK)) Operating voltage (VCC) Hesteresis width (VCC UVLO)
((OSC BLOCK))
RT Output Voltage ((PWMIN BLOCK))
PWMIN pin H level input voltage range ...
Similar Datasheet