FAST SWITCHING RECTIFIERS
RGP15A THRU RGP15M
FAST SWITCHING RECTIFIERS
GLASS PASSIVATED JUNCTION Reverse Voltage – 50 to 1000 Volts Forward Curren...
Description
RGP15A THRU RGP15M
FAST SWITCHING RECTIFIERS
GLASS PASSIVATED JUNCTION Reverse Voltage – 50 to 1000 Volts Forward Current – 1.5 Amperes
Features
High temperature metallurgically bonded construction Cavity-free glass passivated junction. 1.5 Ampere operation at TA = 55oC with no thermal
runaway. Typical IR less than 0.1µA High temperature soldering guaranteed:
350oC/10seconds, 0.375” (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-204AC, molded plastic over glass body. Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any
Absolute Maximum Ratings and Characteristics Ratings at 25oCambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current 0.375” (9.5mm) lead length at TA = 55 OC
Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method)
Maximum full load reverse current, full cycle average 0.375” (9.5mm) lead length at TA = 55 OC Maximum instantaneous forward voltage at 1.5A Maximum DC reverse current TA = 25 OC at rated DC blocking voltage TA = 150OC
Maximum reverse recovery time
IF=0.5A, IR=1A, Irr=0.25A. Typical junction capacitance at 4 V, 1MHz
Typical thermal resistance (Note 1)
Operating junction and storage temperature range
Symbols RGP
15A
VRRM VRMS VDC
50 35 50
IF(AV)
IFSM
IR(AV) VF ...
Similar Datasheet