WS3232

WS3232 WS3232 High PF PSR Constant Current LED Driver Features � ±5% LED Current Accuracy � Primary-side Sensing and Regulation Without TL431 and Opto-coupler � No Auxiliary Winding For Sensing And Supplying � High Power Factor Correction � QR mode � 600V MOS integrated � Ultra low operating current � LED Open/Short Circuit Protection � CS Resistor Short Circuit Protection � VCC over voltage protection & under voltage lockout( UVLO) � Over Temperature Protection Applications � GU10 LED driver � LED spot light � Other LED lighting General Description WS3232 is a high PF primary-side feedback and regulation controller for LED lighting, optimized for flyback converter with the output power less than 30W. Since adopting primary sense and feedback control technology, the secondary sense and feedback circuit is eliminated. And WS3232 does not need the auxiliary winding for sensing the output current and supplying the chip. The low component counts and small system size are realized. Since using the high accurate current sense method, WS3232 realizes ±5% accuracy of LED current along with excellent line and load regulation. WS3232 offers comprehensive protection including Cycle-by-Cycle current limiting (OCP), LED open/short circuit protection, CS resistor short circuit protection, VCC UVLO,OVP and Clamp, and over temperature protection. WS3232 is available in DIP-8 package. Typical Application Circuit NP NS AC 1 VCC 2 NC 3 COMP 4 CS GND 8 GND 7 D6 D5 W/T-D036-Rev.A/0 Dec.2...