Product Description
The PE43503 is a HaRP™-enhanced, high linearity, 5-bit RF Digital Step Attenuator (DSA) covering a 3...
Product Description
The PE43503 is a HaRP™-enhanced, high linearity, 5-bit RF Digital Step Attenuator (DSA) covering a 31 dB attenuation range in 1 dB steps. The Peregrine 50Ω RF DSA provides a serial CMOS control interface. It maintains high attenuation accuracy over frequency and temperature and exhibits very low insertion loss and low power consumption. Performance does not change with Vdd due to on-board
regulator. This next generation Peregrine DSA is available in a 4x4 mm 24-lead QFN footprint.
The PE43503 is manufactured on Peregrine’s UltraCMOS™ process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS.
Figure 1. Package Type
24-lead 4x4x0.85 mm QFN Package
Product Specification
PE43503
50 Ω RF Digital Attenuator 5-bit, 31 dB, 9 kHz - 6.0 GHz
Features HaRP™-enhanced UltraCMOS™ device Attenuation: 1 dB steps to 31 dB High Linearity: Typical +58 dBm IP3
Excellent low-frequency performance
3.3 V or 5.0 V Power Supply Voltage Fast switch settling time Programming Modes:
Direct Parallel Latched Parallel Serial High-attenuation state @ power-up (PUP) CMOS Compatible No DC blocking capacitors required Packaged in a 24-lead 4x4x0.85 mm QFN
Figure 2. Functional Schematic Diagram
Switched Attenuator Array RF Input
RF Output
Parallel Control 5 Serial In CLK LE
Control Logic Interface
A0 A1
Document No. 70-0252-05 │ www.pse...