FAST RECOVERY PLASTIC RECTIFIERS
RGP10A THRU RGP10M
FAST RECOVERY PLASTIC RECTIFIERS SINTERED GLASS JUNCTION
Reverse Voltage – 50 to 1000 Volts Forward C...
Description
RGP10A THRU RGP10M
FAST RECOVERY PLASTIC RECTIFIERS SINTERED GLASS JUNCTION
Reverse Voltage – 50 to 1000 Volts Forward Current – 1.0 Amperes
Features High temperature metallurgically bonded construction Sintered glass cavity free junction. Capability of meeting environmental standard of MIL-S-19500. High temperature soldering guaranteed 350oC/10sec/0.375” lead length at 5 lbs tension Operate at TA = 55oC with no thermal run away Typical ir<0.1μA.
Mechanical Data
Terminals: Plated axial leads, solderable per MIL-STD 202E, method 208C
Polarity: Color band denotes cathode Mounting Position: Any
Maximum Ratings and Electrical Characteristics
Ratings at 25oCambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.
Symbols RGP RGP RGP RGP RGP RGP RGP Units
10A 10B 10D 10G 10J 10K 10M
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 3/8” lead length at TA = 55 OC
VRRM VRMS VDC
I(AV)
50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 600 800 1000 V
1.0 A
Peak forward surge current 8.3mS single half sine-wave superimposed on rated load
IFSM
30 A
Maximum forward voltage at rated forward current and 25oC
VF
1.3 V
Maximum full load reverse current, full cycle average at 55 OC Ambient
Maximum DC reverse current
at rated DC blocking voltage 150OC
TA = 25 OC TA =
IR(AV) IR
Maximum reverse recovery time (Note 1) ...
Similar Datasheet