Voltage Suppressor. 1.5SMC200 Datasheet

1.5SMC200 Datasheet PDF, Equivalent


Part Number

1.5SMC200

Description

1500 Watts Surface Mount Transient Voltage Suppressor

Manufacture

LGE

Total Page 4 Pages
PDF Download
Download 1.5SMC200 Datasheet PDF


1.5SMC200 Datasheet
1.5SMC SERIES
1500 Watts Surface Mount Transient Voltage Suppressor
SMC/DO-214AB
Features
For surface mounted application in order to optimize
board space
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps from 0
volt to BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
260oC / 10 seconds at terminals
Plastic material used carries Underwriters Laboratory
Flammability Classification 94V-0
1500 watts peak pulse power capability with a 10 x
1000 us waveform by 0.01% duty cycle
Mechanical Data
Dimensions in inches and (millimeters)
Case: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Weight: 0.21gram
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Type Number
Symbol
Value
Units
Peak Power Dissipation at TA=25oC, Tp=1ms ( Note 1)
Power Dissipation on Intinite Heatsink, TA=50oC
PPK
PM(AV)
Minimum 1500
6.5
Watts
W
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3) - Unidirectional Only
IFSM
200
Amps
Thermal Resistance Junction to Ambient Air (Note 4)
RθJA
50
oC/W
Thermal Resistance Junction to Leads
RθJL
15
oC/W
Operating and Storage Temperature Range
TJ, TSTG
-55 to + 150
Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25oC Per Fig. 2.
2. Mounted on 8.0mm2 (.013mm Thick) Copper Pads to Each Terminal.
oC
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute
Maximum.
4. Mounted on 5.0mm2(.013mm thick) land areas.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types 1.5SMC6.8 through Types 1.5SMC200A.
2. Electrical Characteristics Apply in Both Directions.
http://www.luguang.cn
- 542 -
mail:lge@luguang.cn

1.5SMC200 Datasheet
1.5SMC SERIES
1500 Watts Surface Mount Transient Voltage Suppressor
RATINGS AND CHARACTERISTIC CURVES (1.5SMC SERIES)
FIG.1- PEAK PULSE POWER RATING CURVE
100
NON-REPETITIVE
PULSE WAVEFORM
SHOWN in FIG.3
TA = 25OC
10
1
FIG.2- PULSE DERATING CURVE
200
150
100
50
0.1
0.1 s
1 s 10 s
100 s
tp, PULSE WIDTH, sec.
1.0ms
10ms
FIG.3- CLAMPING POWER PULSE WAVEFORM
150
PULSE WIDTH (td) is DEFINED
tr = 10 sec
as the POINT WHERE the PEAK
CURRENT DECAYS
Peak Value to 50% of IPPM
100 IPPM
Half Value - IPPM
2
10/1000 sec. WAVEFORM
50 as DEFINED by R.E.A.
0
0 25 50 75 100 125 150 175 200
TA, AMBIENT TEMPERATURE. (OC)
FIG.4- MAXIMUM NON-REPETITIVE FORWARD SURGE
CURRENT UNIDIRECTIONAL ONLY
200
8.3ms Single Half Sine Wave
JEDEC Method
Tj=Tj max.
100
td
0
0 1.0
2.0
t, TIME, ms
3.0
FIG.5- TYPICAL JUNCTION CAPACITANCE
UNIDIRECTIONAL
10000
UNIDIRECTIONAL
BIDIRECTIONA
1000
VR=0
10
4.0 1
10
NUMBER OF CYCLES AT 60Hz
100
Tj = 25OC
100 f=1.0MHz
Vsig=50mVp-p
VR-RATED
STAND-OFF
VOLTAGE
10
1
10
V(BR), BREAKDOWN VOLTAGE. VOLTS
100 200
http://www.luguang.cn
mail:lge@luguang.cn
Version: B07


Features Datasheet pdf 1.5SMC SERIES 1500 Watts Surface Mount T ransient Voltage Suppressor SMC/DO-214A B Features For surface mounted applic ation in order to optimize board space Low profile package Built-in strain rel ief Glass passivated junction Excellent clamping capability Fast response time : Typically less than 1.0ps from 0 volt to BV min. Typical IR less than 1μA a bove 10V High temperature soldering gua ranteed: 260oC / 10 seconds at terminal s Plastic material used carries Underwr iters Laboratory Flammability Classific ation 94V-0 1500 watts peak pulse power capability with a 10 x 1000 us wavefor m by 0.01% duty cycle Mechanical Data Dimensions in inches and (millimeters) Case: Molded plastic Terminals: Solder plated Polarity: Indicated by cathode band Weight: 0.21gram Maximum Ratings and Electrical Characteristics Rating a t 25 oC ambient temperature unless othe rwise specified. Type Number Symbol Value Units Peak Power Dissipation at TA=25oC, Tp=1ms ( Note 1) Power Dissipation on Intinite Heatsin.
Keywords 1.5SMC200, datasheet, pdf, LGE, 1500, Watts, Surface, Mount, Transient, Voltage, Suppressor, .5SMC200, 5SMC200, SMC200, 1.5SMC20, 1.5SMC2, 1.5SMC, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)